To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

MARCO UPE Electronic Pressure Pump

Art. No.	model	pressure (bar)	capacity	current (A)	thread size (inch)	for hose (mm)	L x B x H (mm)	weight (kg)	Price (unit)	Delivery time	Note list	Buy

Downloads

Gear pump for drinking water with electronic speed control and stepless smooth start-up. Due to the electronic speed control, which adapts to the withdrawal quantity, no pressure fluctuations and pulsation occur in the on-board system.

The pump body is made of nickel-plated brass, and the shaft is made of stainless steel.

Features:

electronic speed control,
self-priming, non-dry self-priming,
PEEK gears are durable, guarantee high pressure, quiet running and are very temperature resistant,
integrated check valve.
Multi-voltage capable: Suitable for 12V and 24V.

A pressure compensation tank is only required for stiff or short pipes or if electrovalves are used.

Connection: BSP female thread, supplied complete with matching stainless steel hose nozzles.

Several versions are available:

Type UP2/E: 2 taps.
Type UP3/E, UP6/E, UP12/E: 3 taps, with pre-filter.
Type UP14/E: 3 taps with pre-filter, including control panel PCS .

Questions about the product?

Accessories

Spare filter kit for MARCO pumps UPE

Spare filter kit for MARCO pumps UPE

Filter made of transparent nylon, which protects gear and impeller pumps from small particle contamination. The stainless steel filter net (AISI 304) has a mesh size of 0.5 mm, the enclosed fittings (two hose nozzles and a double nipple fitting) are made of chrome-plated brass.The filter is suitable for bilge and fresh water pumps and can be connected directly to MARCO UPE pumps with the enclosed double nipple. With the enclosed hose nozzles, it can also be integrated into a (hose) line system as an inline filter. The filter can be easily opened for cleaning and can be checked easily through the transparent nylon housing.

From €39.00 *

MARCO Controlpanel PCS for MARCO UPE Pump

MARCO Controlpanel PCS for MARCO UPE Pump

The MARCO PCS control panel allows the electronic pump to be switched on and off and monitored.Functions:On / Off,monitoring whether the pump is runningReset (if the pump has failed e.g. due totoo little liquid or overload),monitoring whether there is still enough liquid to pump.The control panel can be built in (a circular hole with a diameter of 70 mm is required), or screwed on with the housing.The control panel is connected to the pump by RJ11/6 telephone cable.Suitable for 12 and 24 volts. IP protection class 65. Dimensions L x W x H: 80 x 80 x 46 mm.

€69.90 *

MARCO ATX Accumulator Tanks

MARCO ATX Accumulator Tanks

Stainless pressure tanks MARCO ATX. The tanks have an interior rubber diaphragm with preset pressure cushion and a SCHRADER valve to create the pressure.These accumulator tanks generate constant flow to the pressure-water system with limited pumping intervals and power draw.MARCO ATX1:Volume 0,5 l, Connection 3/8" BSP with stainless T-connection.MARCO ATX2:Volume 2,0 l, Connection 1/2" BSP with stainless T-connection. Max. pressure of the tanks: 10 bar.

From €76.90 *

MARCO AT Accumulator Tanks

MARCO AT Accumulator Tanks

Pressure tanks MARCO AT, made from steel, white coated. The tanks have an interior rubber diaphragm with preset pressure cushion and a SCHRADER valve to control the pressure.These accumulator tanks generate constant flow to the pressure-water system with limited pumping intervals and power draw.MARCO AT1: Volume 2,0 l. Connection 1/2" BSP.MARCO AT2: Volume 5,0 l. Connection 3/4" BSP.Max. pressure 10 bar.

From €69.90 *

Hose clamp stainless steel

Hose clamp stainless steel

Solid stainless steel design - all pieces completely stainless.With hexagonal bolts for high torque, high tear resistance and elasticity.

From €1.80 *

PVC hose (food safe)

PVC hose (food safe)

Transparent PVC hose with cross-fabric insert of polyester yarn.Food safe, resistant to chemicals and oil.Temperature resistant from -5°C to +60°C.Also intended for pressurized water systems.

From €2.50 *

EPDM freshwater hose

EPDM freshwater hose

High-quality drinking water hose made of smooth EPDM rubber that is resistant to heat, abrasion and weathering. Lightweight, flexible (bending radius 130 mm) and absolutely light-tight. The hose is food-safe and FDA-compliant, the material does not release any substances into the fresh water and is durable. Can be used in the temperature range -40°C to 100°C and in the pressure range up to 15 bar. Available in blue and red.

From €9.60 *

Similar products

Automatic pressure pump WHALE WaterMaster

Automatic pressure pump WHALE WaterMaster

The very quiet running WHALE WaterMaster is a four chamber diaphragm pump - a further development of the tried and tested UNIVERSAL pump.The pump runs dry without damage (within reason) and is self priming up to 3m, it delivers a smooth constant flow from a specially designed diaphragm.The pump has a fully sealed protective motor housing with completely integrated electronics according to IP 65 and is suitable for use with salt or fresh water.The shipment includes a strainer to protect the pump from debris.Simple installation: WHALE QUICK-CONNECT - 15 mm quick connect plumbing or ½" horsetails or 13mm hose. Measurements (L x W x H): 209 x 179 x 125, Weight: 1600 g.

From €144.00 *

Pressure-water pump WHALE-UNIVERSAL UF1825

Pressure-water pump WHALE-UNIVERSAL UF1825

Universal Pressure Pump 18 ltrs/min (4.75 US gals/min).High capacity demand and washdown pressure pump.Services up to 6 taps.- Quiet operation- Runs dry without damage- Inlet strainer included- Quick Connect ports with adaptors included- Suitable for use with saltwater and freshwater- Self-priming up to 3 m (10 ft)- Smooth constant flow- Extra protection and safety with wires and pressure switch housed internally- Universal mounting arrangement fits any existing installation.- May also be used with salt water.Supplied with Quick Connect inlet and outlet for fast connection directly to System 15 plumbing. Includes pre-strainer/filter that pivots to suit plumbing direction. 2 x 13mm barbed hose connections and 2 x 1/2″ BSP threaded tails are also included for connection to non-Quick Connect 15 plumbing.

From €279.00 *

AQUA KING II Premium 4.0 SHURFLO fresh water pump

AQUA KING II Premium 4.0 SHURFLO fresh water pump

The pump AQUA KING II Standard 3.0 is a powerful fresh water pump in marine quality. The pump has been proven for years, has a quiet running and offers a usage comfort like at home.The 4-chamber diaphragm pump is self-priming up to 1.8 m and may run dry. A pre-filter ensures clean drinking water. The encapsulated pressure switch start at 2.8 bar and off again at 3.8 bar. The pump is equipped with an integrated bypass for precise and controlled dosing and even water flow, a pressure compensation vessel is not required.Technical features:4-chamber diaphragm pump,max. flow rate: 15.1 l/min,pressure: 2.8 - 3.8 bar,for supplying up to 4 taps,comes with a pre-filter,dry-self-priming and dry-running safe,motor and pump head drive made of metal,pump head and mounting foot made of PP,rubber bearing for a high running smoothness,the motor is explosion-proof,connection thread 1/2" external thread,delivery includes two hose nozzles for 13 mm hose.Angled hose nozzles are also available.

From €189.95 *

AQUA KING II Standard 3.0 SHURFLO fresh water pump

AQUA KING II Standard 3.0 SHURFLO fresh water pump

The pump AQUA KING II Standard 3.0 is a powerful fresh water pump in marine quality. The pump has been proven for years, has a quiet running and offers a usage comfort like at home.The 4-chamber diaphragm pump is self-priming up to 1.5 m and may run dry. The encapsulated pressure switch start at 1.3 bar and off again at 2.0 bar. The pump is equipped with an integrated bypass for precise and controlled dosing and even water flow, a pressure compensation vessel is not required.Technical features:4-chamber diaphragm pump,max. flow rate: 11.3 l/min,pressure: 2,4 - 3,1 bar,for supplying up to 3 taps,dry-self-priming and dry-running safe,motor and pump head drive made of metal,pump head and mounting foot made of PP,rubber bearing for a high running smoothness,the motor is explosion-proof,connection thread 1/2" external thread,delivery includes two hose nozzles for 13 mm hose, which can be screwed onto the thread with a quick-release fastener.

From €139.95 *

AQUA KING II Supreme 5.0 SHURFLO fresh water pump

AQUA KING II Supreme 5.0 SHURFLO fresh water pump

The pump AQUA KING II Supreme 5.0 is a powerful fresh water pump in marine quality. The pump has been proven for years, has a quiet running and offers a usage comfort like at home.The 4-chamber diaphragm pump is self-priming up to 1.8 m and may run dry. A pre-filter ensures clean drinking water. The encapsulated pressure switch start at 2.8 bar and off again at 3.8 bar. The pump is equipped with an integrated bypass for precise and controlled dosing and even water flow, a pressure compensation vessel is not required.Technical features:4-chamber diaphragm pump,max. flow rate: 18.9 l/min,pressure: 2.8 - 3.8 bar,for supplying up to 5 taps,comes with a pre-filter,dry-self-priming and dry-running safe,motor and pump head drive made of metal,pump head and mounting foot made of PP,rubber bearing for a high running smoothness,the motor is explosion-proof,connection thread 1/2" external thread,delivery includes two hose nozzles for 13 mm hose, which can be screwed onto the thread with a quick-release fastener.

From €226.95 *

Pressure water pump FLOJET QUAD 4405

Pressure water pump FLOJET QUAD 4405

High-performance drinking water pump for pressure systems, laid out as a four-chamber membrane pump, with automatic pressure switch for max. 4 taps.The pump is self-priming to 2 m, can run dry safely and runs extremely quietly, thanks to rubber mountings.Attachment: plug with 13 mm hose nozzle and plug with 1/2" male threadWe exclusively carry FLOJET pumps, which have been developed especially for the marine industry (not camping pumps).

€179.00 *

Pressure water pump FLOJET QUAD 4325

Pressure water pump FLOJET QUAD 4325

High-performance universal pump with pressure switch, intended as a drinking-water pump (max. 5 taps) or as a deck-wash pump (comes with filter), laid out as a four-chamber membrane pump.The pump is self-priming to 2 m, can run dry safely and runs extremely quietly, thanks to rubber mountings.Attachment: plug with 19 mm hose nozzle, plug with 3/4" thread .We exclusively carry FLOJET pumps, which have been developed especially for the marine industry (not camping pumps).

From €329.00 *

Bilge pump FLOJET QUAD 4125

Bilge pump FLOJET QUAD 4125

High-performance bilgepump without pressure switch, laid out as a four-chamber membrane pump.The pump is self-priming to 2 m, can run dry safely and runs extremely quietly, thanks to rubber mountings.Attachment: plug with 19 mm hose nozzle, plug with 3/4" male thread.We exclusively carry FLOJET pumps, which have been developed especially for the marine industry (not camping pumps).Comes with wide-mesh screen.

From €279.00 *

Last seen products

More articles from this category

Automatic pressure pump WHALE WaterMaster

Automatic pressure pump WHALE WaterMaster

The very quiet running WHALE WaterMaster is a four chamber diaphragm pump - a further development of the tried and tested UNIVERSAL pump.The pump runs dry without damage (within reason) and is self priming up to 3m, it delivers a smooth constant flow from a specially designed diaphragm.The pump has a fully sealed protective motor housing with completely integrated electronics according to IP 65 and is suitable for use with salt or fresh water.The shipment includes a strainer to protect the pump from debris.Simple installation: WHALE QUICK-CONNECT - 15 mm quick connect plumbing or ½" horsetails or 13mm hose. Measurements (L x W x H): 209 x 179 x 125, Weight: 1600 g.

From €144.00 *

Pressure-water pump WHALE-UNIVERSAL UF1825

Pressure-water pump WHALE-UNIVERSAL UF1825

Universal Pressure Pump 18 ltrs/min (4.75 US gals/min).High capacity demand and washdown pressure pump.Services up to 6 taps.- Quiet operation- Runs dry without damage- Inlet strainer included- Quick Connect ports with adaptors included- Suitable for use with saltwater and freshwater- Self-priming up to 3 m (10 ft)- Smooth constant flow- Extra protection and safety with wires and pressure switch housed internally- Universal mounting arrangement fits any existing installation.- May also be used with salt water.Supplied with Quick Connect inlet and outlet for fast connection directly to System 15 plumbing. Includes pre-strainer/filter that pivots to suit plumbing direction. 2 x 13mm barbed hose connections and 2 x 1/2″ BSP threaded tails are also included for connection to non-Quick Connect 15 plumbing.

From €279.00 *

Electric diaphragm pump WHALE GULPER 220

Electric diaphragm pump WHALE GULPER 220

WHALE GULPER type 220: Electric membrane pump for pumping the bilge or emptying the head or holding tank (grey water pump). Self-priming. Suction lift max. 3 m, dicharge head max. 3 m, combined suction lift / discharge head max. 4m.Odorless running, vibration absorbing rubber feet.Universal installation due to swiveling pump heads.For tube 19mm. Weight 1.5 kg. Dimensions: L x W x H = 273 x 111 x 117 mm. Spare-parts sets available.

From €198.00 *

Electric diaphragm pump WHALE GULPER 320

Electric diaphragm pump WHALE GULPER 320

WHALE GULPER type 320: Electric membrane pump for pumping the bilge or pumping out the head or holding tank (grey water pump). Self-priming. Suction lift max. 3m, dicharge head max. 3 m, combined suction lift / discharge head max. 4m.Odorless running, vibration absorbing rubber feet.Universal installation due to swiveling pump heads.A variable tube adaptor connects the GULPER 320 to 19mm or 25mm tube. Weight 1.6 kg. Dimensions: L x W x H = 273 x 111 x 117 mm. Spare-parts sets available.

From €259.00 *

Waste pump WHALE GULPER

Waste pump WHALE GULPER

Membrane pump for emptying holding tanks.^ Protected against dry-running, self-priming to 3 m, discharge height max. 4 m. Low power draw; 2.5 A (at 12 V)Inlet hose attachments on both sides 38 mm. Dimensions: 340 x 300 x 120 mm. Weight 2.2 kg.

From €499.00 *

Pressure water pump SHURFLO NAUTILUS

Pressure water pump SHURFLO NAUTILUS

This pump is specially developed for maritime use in pressure-water installations. Made in the USA by SHURFLO.Benefits:- for direct supply of one tap!- not dry self priming, must be installed at or below tank level,- dry-running safe single chamber pump,- output: 3,8 l/min,- sturdy motor,- very smooth performance, very silent- with hose nozzles for 10 mm tube.

€69.90 *

AQUA KING II Premium 4.0 SHURFLO fresh water pump

AQUA KING II Premium 4.0 SHURFLO fresh water pump

The pump AQUA KING II Standard 3.0 is a powerful fresh water pump in marine quality. The pump has been proven for years, has a quiet running and offers a usage comfort like at home.The 4-chamber diaphragm pump is self-priming up to 1.8 m and may run dry. A pre-filter ensures clean drinking water. The encapsulated pressure switch start at 2.8 bar and off again at 3.8 bar. The pump is equipped with an integrated bypass for precise and controlled dosing and even water flow, a pressure compensation vessel is not required.Technical features:4-chamber diaphragm pump,max. flow rate: 15.1 l/min,pressure: 2.8 - 3.8 bar,for supplying up to 4 taps,comes with a pre-filter,dry-self-priming and dry-running safe,motor and pump head drive made of metal,pump head and mounting foot made of PP,rubber bearing for a high running smoothness,the motor is explosion-proof,connection thread 1/2" external thread,delivery includes two hose nozzles for 13 mm hose.Angled hose nozzles are also available.

From €189.95 *

SHURFLO LO-FLO automatic fresh water pump

SHURFLO LO-FLO automatic fresh water pump

This compact automatic demand fresh water pump offers durability and dependability making it ideal for low volume, intermittent duty applications.The 105 pump self-primes up to 0,75 m / 2.5 feet vertical while delivering over 1.0 GPM.A 12 volt low power consumption motor, equipped with thermal protection and long life pressure switch rated to 2 bar / 30 PSI, provides high pump performance and reliability.Features:- Automatic Demand up to 2 bar / 30 PSI,- Dry self Priming up to 0,76 m vertical,- Long Life Pressure Switch,- Thermally Protected,- Delivers 4 l/min / 1.0 GPM,Dimensions: 173 x 100 x 62 mmHose fitting for 10 mm hose.

€99.90 *

AQUA KING II Junior 2.0 SHURFLO fresh water pump

AQUA KING II Junior 2.0 SHURFLO fresh water pump

The pump AQUA KING II Junior 2.0 is a powerful fresh water pump in marine quality. The pump has been proven for years, has a quiet running and offers a usage comfort like at home.The 4-chamber diaphragm pump is self-priming up to 1.5 m and may run dry. The encapsulated pressure switch start at 1 bar and off again at 2 bar. A pressure compensation vessel is not required.Technical features:4-chamber diaphragm pump,max. flow rate: 7,6 l/min,pressure: 1 - 2 bar,for supplying up to 3 taps,dry-self-priming and dry-running safe,motor and pump head drive made of metal,pump head and mounting foot made of PP,rubber bearing for a high running smoothness,the motor is explosion-proof,connection thread 1/2" external thread,delivery includes two hose nozzles for 13 mm hose, which can be screwed onto the thread with a quick-release fastener.

€124.95 *

AQUA KING II Standard 3.0 SHURFLO fresh water pump

AQUA KING II Standard 3.0 SHURFLO fresh water pump

The pump AQUA KING II Standard 3.0 is a powerful fresh water pump in marine quality. The pump has been proven for years, has a quiet running and offers a usage comfort like at home.The 4-chamber diaphragm pump is self-priming up to 1.5 m and may run dry. The encapsulated pressure switch start at 1.3 bar and off again at 2.0 bar. The pump is equipped with an integrated bypass for precise and controlled dosing and even water flow, a pressure compensation vessel is not required.Technical features:4-chamber diaphragm pump,max. flow rate: 11.3 l/min,pressure: 2,4 - 3,1 bar,for supplying up to 3 taps,dry-self-priming and dry-running safe,motor and pump head drive made of metal,pump head and mounting foot made of PP,rubber bearing for a high running smoothness,the motor is explosion-proof,connection thread 1/2" external thread,delivery includes two hose nozzles for 13 mm hose, which can be screwed onto the thread with a quick-release fastener.

From €139.95 *

AQUA KING II Supreme 5.0 SHURFLO fresh water pump

AQUA KING II Supreme 5.0 SHURFLO fresh water pump

The pump AQUA KING II Supreme 5.0 is a powerful fresh water pump in marine quality. The pump has been proven for years, has a quiet running and offers a usage comfort like at home.The 4-chamber diaphragm pump is self-priming up to 1.8 m and may run dry. A pre-filter ensures clean drinking water. The encapsulated pressure switch start at 2.8 bar and off again at 3.8 bar. The pump is equipped with an integrated bypass for precise and controlled dosing and even water flow, a pressure compensation vessel is not required.Technical features:4-chamber diaphragm pump,max. flow rate: 18.9 l/min,pressure: 2.8 - 3.8 bar,for supplying up to 5 taps,comes with a pre-filter,dry-self-priming and dry-running safe,motor and pump head drive made of metal,pump head and mounting foot made of PP,rubber bearing for a high running smoothness,the motor is explosion-proof,connection thread 1/2" external thread,delivery includes two hose nozzles for 13 mm hose, which can be screwed onto the thread with a quick-release fastener.

From €226.95 *

Pressure water pump FLOJET QUAD 4405

Pressure water pump FLOJET QUAD 4405

High-performance drinking water pump for pressure systems, laid out as a four-chamber membrane pump, with automatic pressure switch for max. 4 taps.The pump is self-priming to 2 m, can run dry safely and runs extremely quietly, thanks to rubber mountings.Attachment: plug with 13 mm hose nozzle and plug with 1/2" male threadWe exclusively carry FLOJET pumps, which have been developed especially for the marine industry (not camping pumps).

€179.00 *

Pressure water pump FLOJET QUAD 4325

Pressure water pump FLOJET QUAD 4325

High-performance universal pump with pressure switch, intended as a drinking-water pump (max. 5 taps) or as a deck-wash pump (comes with filter), laid out as a four-chamber membrane pump.The pump is self-priming to 2 m, can run dry safely and runs extremely quietly, thanks to rubber mountings.Attachment: plug with 19 mm hose nozzle, plug with 3/4" thread .We exclusively carry FLOJET pumps, which have been developed especially for the marine industry (not camping pumps).

From €329.00 *

Bilge pump FLOJET QUAD 4125

Bilge pump FLOJET QUAD 4125

High-performance bilgepump without pressure switch, laid out as a four-chamber membrane pump.The pump is self-priming to 2 m, can run dry safely and runs extremely quietly, thanks to rubber mountings.Attachment: plug with 19 mm hose nozzle, plug with 3/4" male thread.We exclusively carry FLOJET pumps, which have been developed especially for the marine industry (not camping pumps).Comes with wide-mesh screen.

From €279.00 *

Grey water and bilge diaphragm pump JABSCO 50880

Grey water and bilge diaphragm pump JABSCO 50880

A new generation of diaphragm pump in the one compartment design by pump specialist JABSCO.Ideal for the draining of shallow bilges and shower drains.Maintanance is simplified by the filterless design and the pump is indeed free of clogging.Characteristics:Flow rate: Nominal 16 Litres/min. Self-priming from dry up to 3m (10ft) Flexible installation Dry running capability

From €209.90 *

Fresh water pump WHALE INLINE

Fresh water pump WHALE INLINE

Small 12 volt/24 volt pumps for simple drinking water systems.Two-sided hose attachment can be used for either 10 mm or 13 mm (adapter).Not self priming. Available in PREMIUM version for 12 and 24 volts or HIGH FLOW version with higher pump output (only for 12 volts).- low weight, is simply inserted into the pipe or hose system- can be used as a pressure booster in manual or electric pump systems- low power consumption and very quiet- for fresh and salt water

From €59.50 *

Fresh water submersible pump WHALE

Fresh water submersible pump WHALE

Small submersible pumps for simple drinking water systems. The pumps can simply be lowered into the tank or a water canister.Hose connection optionally for 10 mm or 13 mm (push-on adapter supplied). Available in PREMIUM version for 12 or 24 volts or HIGH FLOW version with higher pump output for 12 volts.- Lightweight, simply inserted into the pipe or hose system- can be used as a pressure booster in manual or electric pump systems- low power consumption and very quiet- for fresh or salt water

From €54.90 *

Electric diaphragm pump

Electric diaphragm pump

The self priming membrane type pump is especially suitable for pumping polluted liquids, such as toilet waste, bilge water.The robust pump casing is wholly made from plastic and is equipped with rotatable connectors with sleeves, which can easily be demounted. These contain tube valves.This construction guaranties a very flexible mounting, little danger of blockage and simple cleaning of the pump.The strong electric motor is capable of continuous operation. Pump capacity: 27 l/min Maximum suction height:: 3 m Maximum delivery height: 5 m Housing material: plastic, black Membrane material: neoprene rubber Valve material: natural rubber Current draw for 12 V DC 8 AMP Current draw for 24 V DC 5 AMP Hose fittings for 38 mm Weight: 3,7 kg Mesurements: 300 x 320 x 220 mm

From €449.00 *

MARCO UPE Electronic Pressure Pump

MARCO UPE Electronic Pressure Pump

Gear pump for drinking water with electronic speed control and stepless smooth start-up. Due to the electronic speed control, which adapts to the withdrawal quantity, no pressure fluctuations and pulsation occur in the on-board system.The pump body is made of nickel-plated brass, and the shaft is made of stainless steel.Features:electronic speed control,self-priming, non-dry self-priming,PEEK gears are durable, guarantee high pressure, quiet running and are very temperature resistant,integrated check valve.Multi-voltage capable: Suitable for 12V and 24V.A pressure compensation tank is only required for stiff or short pipes or if electrovalves are used.Connection: BSP female thread, supplied complete with matching stainless steel hose nozzles.Several versions are available:Type UP2/E: 2 taps.Type UP3/E, UP6/E, UP12/E: 3 taps, with pre-filter.Type UP14/E: 3 taps with pre-filter, including control panel PCS .

From €159.00 *

RHEINSTROM deck wash and bilge pump type 4E

RHEINSTROM deck wash and bilge pump type 4E

This self-priming bilge and deck wash pump is suitable for delivering sea water. It is completely made of bronze and stainless steel. Due to its hard-wearing industrial motor a longlasting and reliable operation is guaranteed. Before it is run for the first time it has to be filled with water. Furthermore it is advisable to install a socket safety valve or a foot operated valve into the suction pipe. The pump is non-reactive to sand (particle size up to 2 mm). The model 4 E is totally maintenance-free due to the use of a freely running impeller wheel and a very modern axial face seal. The max. operating time is 1 – 2 hoursTechnical dataOutput:50 l/minHeight pumped: 13 mSuction lift: 3 mAttachment: 3/4" BSP with inner threadsWeight: 7 kg

From €916.00 *

Request sent successfully

Request wasn't send - a error occured. Please try again.