Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Impeller Pump 220 Volt MARCO UP1/AC

1320*02 Impellerpumpe MARCO UP1 220 Volt
1320*02 Impellerpumpe MARCO UP1 220 Volt

€369.90*

€369.90*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

length (mm)
width (mm)
height (mm)
Stk

Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile rubber which allows the problem-free transit of small particles. Nickel-plated brass body, shaft in stainless steel. AISI 316L.

Voltage: 230V-50Hz.
Consumption: 3,3 A.
Fuse: 4 A.
Selfpriming up to 1,5 m height.
Flow rate: 30l/min.
Pressure: 1 bar.
Ports: 1/2" Innengewinde (BSP) or hose diameter: 25 mm.
Motorpower: 550 W.
Weight: 7,3 kg.

Also available for 12 volt or 24 volt. See under similar products.

more information
Show article
📖 View article in the TOPLICHT catalogue


Downloads

Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile rubber which allows the problem-free transit of small particles. Nickel-plated brass body, shaft in stainless steel. AISI 316L.

Voltage: 230V-50Hz.
Consumption: 3,3 A.
Fuse: 4 A.
Selfpriming up to 1,5 m height.
Flow rate: 30l/min.
Pressure: 1 bar.
Ports: 1/2" Innengewinde (BSP) or hose diameter: 25 mm.
Motorpower: 550 W.
Weight: 7,3 kg.

Also available for 12 volt or 24 volt. See under similar products.

Questions about the product?

Accessories

Impeller for impellerpump MARCO UP1
Impeller for impellerpump MARCO UP1
Impeller of special nitril rubber. Original spare part for UP1, UP1-M and UP1/AC MARCO Pumps.Dimensions hight x Ø: 22 x 51.5 mm.Bore Ø: 8 mm.

€32.90 *
Details
Multiflex hose PVC
Multiflex hose PVC
Green transparent PVC hose for drinking water, bilge pumps (also suction side) and on-board toilets.Spiral strengthened and thick-walled version for use as suction or pressure hose.Approved for human consumption. Limited resistance to oil and grease (may harden).

From €4.90 *
Details
T-bolt clamp
T-bolt clamp
Heavy, wide hose clamps, made entirely of A2-stainless steel.Hexagonal bolt for easy mounting in hard-to-reach corners. Due to the width particularly well suited for hose mounting on board.Type: HEAVY DUTY.

From €5.90 *
Details
Hose clamp stainless steel
Hose clamp stainless steel
Solid stainless steel design - all pieces completely stainless.With hexagonal bolts for high torque, high tear resistance and elasticity.

From €1.80 *
Details
Grease for impellers JABSCO
Grease for impellers JABSCO
Accessory for JABSCO impellers: JABSCO impeller grease, 2,5 ml tube.

€3.90 *
Details
Brass adapter with external thread
Brass adapter with external thread
Connector, outer threads BSP on both sides. Made from brass.Thread sizes are the nominal size (BSP) and do not indicate the thread diameter.

From €2.90 *
Details
Non return valve WHALE
Non return valve WHALE
Made of glass fibre reinforced PP plastic with high-quality nitrile lip valve. Suitable for bilge water systems or hand and electric bilge pumps.Non-return valves are integrated into the suction hose, support suction and prevent backflow of water.

€35.90 *
Details

Similar products

Impeller Pump MARCO UP1
Impeller Pump MARCO UP1
Self-priming electric water pump with with nitrile rubber impeller. The pump body is made of nickel-plated brass. The pump is dry self-priming up to 1.5 m height.The connections have a BSP female thread. A direct hose connection to the connection pieces is also possible.Available in two power ratings for 12 or 24 volts.Also available for 220 volts, see matching items. See similar articles.

From €134.00 *
Details
Impeller pump 230V JABSCO UTILITY
Impeller pump 230V JABSCO UTILITY
The self-priming 230 V multi-purpose pump JABSCO 53040 UTILITY is a portable pump for filling, pumping out and transferring fresh, salt, and bilge water.The pump is made from bronze, the impeller from oil-proof nitrile rubber, the shaft from stainless steel with a carbon-ceramic mechanical shaft seal. The compact pump can be deployed in multiple ways with its practical handle, is rapidly self-priming from dry up to 4m and will handle hard or soft solids.Air cooled alternate current motor 230 V / 50 Hz, protection class IP55, 0,25 kW at 1400 rpm. With built-in dry-running protection for up to 30 minutes after initial prime

€1,079.00 *
Details
Impeller pump JABSCO UTILITY-PUPPY 2000
Impeller pump JABSCO UTILITY-PUPPY 2000
Powerful impeller pump with bronze pump head and impeller made of nitrile rubber (oil-resistant), dry self-priming up to 1.20 m. Developed for pumping bilge water. Dry-running protection up to 20 minutes. Capacity 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), suitable for continuous operation.Dimensions 190x120x80 mm.Versions for 12V or 24V on-board voltage are available. Connection 3/4" (inside).

From €439.00 *
Details
Brass bilge water strainer
Brass bilge water strainer
Special brass, with non-return valve, strainer can be unscrewed.

From €21.00 *
Details
Bilge water filter (oil strainer) WAVESTREAM
Bilge water filter (oil strainer) WAVESTREAM
The MARPOL Convention prohibits the discharge of oily wastewater into the sea. This filter removes the oily substances from the pumped bilge water by a patented filter system, so that the bilge water can be pumped out almost without oil residues and the water pollution is minimized.The filter is installed behind the bilge pump and in front of the ship's passage. It is suitable for oil residues, large dirt must be removed from the bilge before.Supplied with a stainless steel wall mounting plate.Replacement filter cartridges are available, annual replacement is recommended.LLOYD'S REGISTER Type Approved.

From €179.00 *
Details

Last seen products

More articles from this category

Impeller Pump 220 Volt MARCO UP1/AC
Impeller Pump 220 Volt MARCO UP1/AC
Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile rubber which allows the problem-free transit of small particles. Nickel-plated brass body, shaft in stainless steel. AISI 316L. Voltage: 230V-50Hz.Consumption: 3,3 A.Fuse: 4 A.Selfpriming up to 1,5 m height.Flow rate: 30l/min.Pressure: 1 bar.Ports: 1/2" Innengewinde (BSP) or hose diameter: 25 mm.Motorpower: 550 W.Weight: 7,3 kg.Also available for 12 volt or 24 volt. See under similar products.

€369.90 *
Details
Impeller pump JABSCO
Impeller pump JABSCO
Self-priming impeller pump with free shaft end. for socket mounting. Equipped with neoprene impeller for use as sea or fresh water pump.The pump housing is made of bronze, the axle with ball bearings is made of stainless steelThe details regarding the output refer to an input speed 1500 U/min and back pressure at 0.3 bar.

€269.00 *
Details
Tool for removing impellers JABSCO
Tool for removing impellers JABSCO
An exceptionally practical tool for removing impellers without damaging the pump housing.Body and jaws of aluminum, shaft of stainless steel.Dimensions, approx. 140 x 165 mm (W x H). Weight, 450 g.

From €99.00 *
Details
Impeller pump WATER-PUPPY 2000
Impeller pump WATER-PUPPY 2000
Efficient electric pump with bronze pump head and impeller of nitrile rubber (oil-proof), dry self-priming to 1.2 m.Power 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), intended for endurance use.Dimensions 190 x 120 x 80 mm.Attachment 1/2" (inner) or 25mm hose.Versions for 12V or 24V on-board voltage are available.Also available is the JABSCO UTILITY PUPPY 2000 version specially designed for pumping bilge water with 20-minute dry-running protection.

From €269.00 *
Details
Impeller pump JABSCO UTILITY-PUPPY 2000
Impeller pump JABSCO UTILITY-PUPPY 2000
Powerful impeller pump with bronze pump head and impeller made of nitrile rubber (oil-resistant), dry self-priming up to 1.20 m. Developed for pumping bilge water. Dry-running protection up to 20 minutes. Capacity 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), suitable for continuous operation.Dimensions 190x120x80 mm.Versions for 12V or 24V on-board voltage are available. Connection 3/4" (inside).

From €439.00 *
Details
Impeller pump JABSCO with mechanical cone clutch
Impeller pump JABSCO with mechanical cone clutch
With mechanical cone clutch.These pumps work via a V-belt and can be coupled by hand when needed. Pump with high output (specification at 1500 U/min and a back pressure of 0.3 bar) and self priming from dry. Well suited as an emergency pump or as a deck-wash pump. Pump housing, bronze; stainless steel shaft; neoprene impeller.

From €1,165.00 *
Details
Impeller Pump MARCO UP1
Impeller Pump MARCO UP1
Self-priming electric water pump with with nitrile rubber impeller. The pump body is made of nickel-plated brass. The pump is dry self-priming up to 1.5 m height.The connections have a BSP female thread. A direct hose connection to the connection pieces is also possible.Available in two power ratings for 12 or 24 volts.Also available for 220 volts, see matching items. See similar articles.

From €134.00 *
Details
Impeller pump with reverse switch MARCO UP1-JR
Impeller pump with reverse switch MARCO UP1-JR
This universal feed pump for freshwater and seawater has a hard-wearing impeller made of nitrile rubber. The motor is equipped with an integrated waterproof switch with three positions (forward/off/reverse) so that the flow direction can be changed.This compact design makes the impeller pump ideal for transferring water or grey water, as well as for emptying bilges and grey water. The pump body is made of nickel-plated brass and the impeller is made of hard-wearing nitrile rubber. The pump is dry self-priming up to a height of 1.5 metres. The connecting pieces allow direct hose connection, but also have BSP internal threads, so that connection with appropriate fittings is also possible.Available in two performance levels for 12 over 24 volts.You can find other MARCO pumps in the UP1 series under the "Similar products" tab.

From €149.00 *
Details