To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Bilge pump WHALE GUSHER URCHIN with fixed handle

1863*01 Bilgepumpe WHALE GUSHER URCHIN mit festem Hebel

1863*01 Bilgepumpe WHALE GUSHER URCHIN mit festem Hebel

Bilge pump WHALE GUSHER URCHIN with fixed handle

€89.00*

€89.00*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

WHALE No

BP9005

description

fixed handle

capacity

50(36) l/min

weight (kg)

0,74

Stk

Compact, light membrane bilge pump.
Housing made of black plastic with blue cover.
Attachments are available for either 25 mm or 38 mm hoses.
Shipping by default with membrane and valves made from robust neoprene rubber.
Model with permanent plastic handle (BP 9005).

more information

📖 View article in the TOPLICHT catalogue

Art. No.	WHALE No	description	capacity	weight (kg)	Price (unit)	Delivery time	Note list	Buy

Downloads

Compact, light membrane bilge pump.
Housing made of black plastic with blue cover.
Attachments are available for either 25 mm or 38 mm hoses.
Shipping by default with membrane and valves made from robust neoprene rubber.
Model with permanent plastic handle (BP 9005).

Questions about the product?

Accessories

Accessories for WHALE GUSHER URCHIN

Accessories for WHALE GUSHER URCHIN

We deliver a lot of spareparts for the WHALE GUSHER URCHIN bilge pump.

From €39.90 *

Multiflex hose PVC

Multiflex hose PVC

Green transparent PVC hose for drinking water, bilge pumps (also suction side) and on-board toilets.Spiral strengthened and thick-walled version for use as suction or pressure hose.Approved for human consumption. Limited resistance to oil and grease (may harden).

From €4.90 *

PVC Hose

Inexpensive, thin-walled gray PVC-design. Can be installed in very small curves without a reduction in cross section.Not intended for installation below the waterline.

From €3.95 *

T-bolt clamp

Heavy, wide hose clamps, made entirely of A2-stainless steel.Hexagonal bolt for easy mounting in hard-to-reach corners. Due to the width particularly well suited for hose mounting on board.Type: HEAVY DUTY.

From €5.90 *

Hose clamp stainless steel

Hose clamp stainless steel

Solid stainless steel design - all pieces completely stainless.With hexagonal bolts for high torque, high tear resistance and elasticity.

From €1.80 *

Elbow for WHALE and HENDERSON pumps

Elbow for WHALE and HENDERSON pumps

For direct, angled attachment to all WHALE and HENDERSON pumps as well as all accessories. Attachment with PVC glue is recommended.

From €19.90 *

Non return valve WHALE

Non return valve WHALE

Made of glass fibre reinforced PP plastic with high-quality nitrile lip valve. Suitable for bilge water systems or hand and electric bilge pumps.Non-return valves are integrated into the suction hose, support suction and prevent backflow of water.

€35.90 *

Bilge strainer WHALE

Bilge strainer WHALE

With integrated check valve for hoses of 25 mm and 38 mm.With sieve on the onboard side.

€35.90 *

Bilge strainer WHALE

Bilge strainer WHALE

With integrated check valve for hoses of 25 mm and 38 mm.With sieve on the outboard side.

€35.90 *

Similar products

Bilge pump WHALE GUSHER URCHIN removable handle

Bilge pump WHALE GUSHER URCHIN removable handle

Compact, light membrane bilge pump. Housing of black plastic with blue cover. Attachments for both 25 or 38 mm hoses. Design with removable stainless steel handle with black grip and lanyard (BP 9021). The pump is also available with a membrane and valves made from nitrile rubber, especially for pumping oil.

From €99.90 *

Bilge pump WHALE GUSHER URCHIN thru deck model

Bilge pump WHALE GUSHER URCHIN thru deck model

Compact, light membrane bilgepump. Housing of black plastic. Attachments for both 25 or 38 mm hoses. Belowdecks design with mounted deck/bulkhead feed through and white valve (BP 9013). Removable stainless steel handle with black grip and safety lanyard (BP 9021).

€119.00 *

Bilge pump WHALE GUSHER TITAN

Bilge pump WHALE GUSHER TITAN

Powerful membrane bilgepump. Housing of black plastic. Removable handle with lanyard. Design (BP 4402). Attachment for hoses 38 mm.

€149.00 *

Bilge pump WHALE GUSHER TITAN thru deck model

Bilge pump WHALE GUSHER TITAN thru deck model

Powerful membrane bilgepump. Housing of black plastic, removable handle with lanyard. Design with mounted deck/bulkhead feed through and white valve (BP 4410). Attachment for hoses 38 mm.

€189.90 *

Diaphragm bilge pump PLASTIMO 12760

Diaphragm bilge pump PLASTIMO 12760

Plastic manual bilge pump with membrane and vents of oil-proof nitrile rubber. The pump can be mounted very compactly (horizontally or vertically), so that eight different hose positions are possible. Self-priming (max. 2.5 m). Assets: - 25 mm gland, - Inlet, 30 l/min (capacity, 0.5 l/pump), - Handle length, 290 mm, - Weight, 500 g, - Color: body, blue; handle, black.

€79.00 *

Last seen products

More articles from this category

Diaphragm bilge pump PLASTIMO 12760

Diaphragm bilge pump PLASTIMO 12760

Plastic manual bilge pump with membrane and vents of oil-proof nitrile rubber. The pump can be mounted very compactly (horizontally or vertically), so that eight different hose positions are possible. Self-priming (max. 2.5 m). Assets: - 25 mm gland, - Inlet, 30 l/min (capacity, 0.5 l/pump), - Handle length, 290 mm, - Weight, 500 g, - Color: body, blue; handle, black.

€79.00 *

Diaphragm bilge pump PLASTIMO without outlets

Diaphragm bilge pump PLASTIMO without outlets

High-capacity plastic manual bilge pump (color: blue) with vent and membrane of oil-proof nitrile rubber. The pump is self-priming (max. 2.5 m).Comes without hose attachments (must be ordered seperatly, see Accessories).Inlet: 50 l/min (capacity, 0.85 l/pump).Handle length: 400 mm. Weight, 1 kg.Dimensions: 240 x 170 x 150 mm.Detachable lever. An inspection port allows easy cleaning of the pump.

€119.00 *

Diapragm pump PLASTIMO with built-in outlets

Diapragm pump PLASTIMO with built-in outlets

High-capacity plastic manual bilge pump (color: blue) with vent and membrane of oil-proof nitrile rubber. The pump is self-priming (max. 3 m).Comes with straight hose attachment for 38 mm hose.Inlet: 50 l/min (capacity, 0.85 l/pump).Handle length: 400 mm, weight: 1 kg.Dimensions: 240 x 170 x 150 mm.Removable lever. An inspection port allows easy cleaning of the pump.

€119.00 *

Bilge pump PLASTIMO with bypass

Bilge pump PLASTIMO with bypass

A manual bilge pump with unique features: Simple and space-saving bulkhead mounting, closed extruding only by 35 mm, operable at any time by a lever (elongated 320 mm long) that is extricable housed in the cover. Universal installation of the pump with attached hose couplings (25 or 38 mm), that can freely rotate, are angulated and detachable. Easy maintenance and simple membrane replacement. Materials: the body of the pump (grey) and cover (white) are made from plastic, lever stainless steel, membrane and valve are oil resistant nitrile rubber. Employing the integrated bypass an additional electric bilge pump can be used. Capacity 1l/hoisting, weight 920 g.

From €139.00 *

Hand bilge pump

Hand bilge pump

Plastic, with outlet hose (80 cm) and attachable inlet hose (30 cm), Hose diameter 25 mm (1"). Universal pump: as a bilge pump or for for pumping other liquids; gas- and oil-proof.

From €19.90 *

Manual bilge pump by PLASTIMO

Manual bilge pump by PLASTIMO

Proven manual pump made from plastic for water and other liquids.Suitable for a tube diameter of 25 mm.Measurements:drum diameter: 50 mm,length over all: 500 mm.

€26.00 *

Automatic bilge pump DRAINMAN

Automatic bilge pump DRAINMAN

Bilgepumpe, powered by nature.A clever idea from Sweden: a plastic pump fitted between a strong polyester strap attached to mooring lines is worked simply by the power of wind and waves to pump up to 2500 litres water per day from the bilge of your boat.No electricity required.The strap with two loops has a load capacity of up to 1500 kg and is simply hooked between one of the mooring lines.A neoprene cover protects the pump against sunlight.<brComes with a siphon hose of 3,00 m. A siphon hose extension is available separately. Shackles or hooks are not supplied.

From €69.00 *

Bilge pump WHALE GUSHER 10 MK3 Standard

Bilge pump WHALE GUSHER 10 MK3 Standard

Proven, very powerful bilge pump (diaphragm bilge pump) WHALE Gusher MK3 Standard BP3708 for mounting on the bottom or on the bulkhead.The sturdy housing is made of epoxy coated light metal, color yellow. The diaphragm is made of neoprene rubber. The lever is removable and has a care line.The pump is easy to maintain because all parts are easily accessible.Connection for hoses 38 mm.The pump is also available in a version for mounting below deck.

€339.90 *

Bilge pump WHALE GUSHER 30

Bilge pump WHALE GUSHER 30

The GUSHER 30 is the largest manual bilge pump from WHALE, with a maximum flow rate of 117 litres per minute (at 70 strokes).The housing of this durable double diaphragm pump, which has been tried and tested for decades, is made of powder-coated die-cast aluminium alloy.Coating colour white. Hose connection 38 mm.Self-priming up to a maximum of 4 m, maximum pump height 4 m.No tools are required for inspection and cleaning. Long, removable lever with safety rope. Easily pumps oily bilge water or grey water.Available as a standard version (BP 3000), as a version for bulkhead mounting (BP 3010) or for underdeck mounting (BP 3020). In conjunction with the below deck conversion kit (AS 3020), the standard pump can also be converted for underdeck mounting.According to the manufacturer, the pump is approved for use as an emergency fire pump on some ships.In accordance with ISO15083 the WHALE GUSHER 30 is suitable as a primary bilge pump for vessels from 12 metres hull length. Approved by Lloyds (MCA) and USCG.

From €879.00 *

Bilge pump WHALE GUSHER TITAN

Bilge pump WHALE GUSHER TITAN

Powerful membrane bilgepump. Housing of black plastic. Removable handle with lanyard. Design (BP 4402). Attachment for hoses 38 mm.

€149.00 *

Bilge pump WHALE GUSHER TITAN thru deck model

Bilge pump WHALE GUSHER TITAN thru deck model

Powerful membrane bilgepump. Housing of black plastic, removable handle with lanyard. Design with mounted deck/bulkhead feed through and white valve (BP 4410). Attachment for hoses 38 mm.

€189.90 *

Bilge pump WHALE GUSHER URCHIN with fixed handle

Bilge pump WHALE GUSHER URCHIN with fixed handle

Compact, light membrane bilge pump.Housing made of black plastic with blue cover.Attachments are available for either 25 mm or 38 mm hoses.Shipping by default with membrane and valves made from robust neoprene rubber.Model with permanent plastic handle (BP 9005).

€89.00 *

Bilge pump WHALE GUSHER URCHIN removable handle

Bilge pump WHALE GUSHER URCHIN removable handle

Compact, light membrane bilge pump. Housing of black plastic with blue cover. Attachments for both 25 or 38 mm hoses. Design with removable stainless steel handle with black grip and lanyard (BP 9021). The pump is also available with a membrane and valves made from nitrile rubber, especially for pumping oil.

From €99.90 *

Bilge pump WHALE GUSHER URCHIN thru deck model

Bilge pump WHALE GUSHER URCHIN thru deck model

Compact, light membrane bilgepump. Housing of black plastic. Attachments for both 25 or 38 mm hoses. Belowdecks design with mounted deck/bulkhead feed through and white valve (BP 9013). Removable stainless steel handle with black grip and safety lanyard (BP 9021).

€119.00 *

Diaphragm pump cast iron

Diaphragm pump cast iron

A very heavy, sturdy membrane hand pump. Self-priming. Body of painted cast iron.Strong EPDM rubber membrane and easily accessible rubber ball vents.Pumps bilge water, grey and black water.Not to be used for pure fuel or oil. The pump handle is removable. The pump is intended for vertical use. Attachment: both sides 1 1/2" inner threads. Output: 40 l/min (capacity 0.65 l/pump). Weight: 12 kg.Spares are available.

€249.00 *

Bilge pump HENDERSON/WHALE MK5 T/A

Bilge pump HENDERSON/WHALE MK5 T/A

Proven bilge pump with robust housing of white plastic for mounting on the bulkhead (bulkhead pump), especially suited for the installation in the sanitary areas. The efficient membrane pump is easy to maintain without tools through the large screw-off inspection port. Self priming up to 4,5m, maximum delivery height: 4,5m. For hose fittings of 38mm. Very well suited as a head pump, for example, for LAVAC POPULAR or ZENITH toilets (vacuum pumps). Type HENDERSON MK5 T/A, white.

€139.00 *

Bilge pump HENDERSON/WHALE MK5 U/D under deck

Bilge pump HENDERSON/WHALE MK5 U/D under deck

Proven bilge pump with robust housing of white plastic for mounting behind the bulkhead or below the deck with through reaching pump handle (bulkhead pump, below deck pump), especially suited for the installation in the sanitary areas. The efficient membrane pump is easy to maintain without tools through the large screw-off inspection port. Self priming up to 4,5m, maximum delivery height: 4,5m. For hose fittings of 38mm. Very well suited as a head pump, for example, for LAVAC POPULAR or ZENITH toilets (vacuum pumps). Type HENDERSON MK5 U/D, white.

€159.00 *

Bilge pump HENDERSON/WHALE COMPACT 50

Bilge pump HENDERSON/WHALE COMPACT 50

Compact hand membrane pump for below-decks mounting.The pump direction can be freely determined.Comes with white plastic deck plate.Hose attachment 25 mm.

€129.00 *

Bilge pump HENDERSON/WHALE MK5

Bilge pump HENDERSON/WHALE MK5

Proven diaphragm pump with robust housing made of black PVC, with universal mounting options that allow three different mounting positions.The pump can be converted for below deck/bulkhead mounting using the conversion kit (DP9906). Easy to service without tools through the large screw cap inspection opening.Self-priming up to max. 4.5m, pump height max. 4.5m. Can be used for 38 mm hoses.In accordance with ISO15083, the HENDERSON/WHALE MK5 is suitable as a main bilge pump for vessels with a hull length of 12 metres or more. Approved by Lloyds (MCA) and USCG.

€134.00 *

All-round hand pump EVS/LAVAC MK5

All-round hand pump EVS/LAVAC MK5

Inexpensive universal and bilge pump,self-priming to 4.5m,max. pump height 4.5m,pumping power to approx. .55 l/minute (at 60 pumping actions),hose attachment 38mm,membrane and vent of nitrile rubber,stainless steel handle, black housing.The large inspection port allows simple, tool-less maintenance. Various mounting options.

€99.90 *

Request sent successfully

Request wasn't send - a error occured. Please try again.