Skip to main content


Downloads

Proven membrane foot pump for fresh water.
Delivers with every push, self-priming (max. 1.5 m), output approx. 5 l/min.
Dimensions: D= 89 mm; height 70 mm;
Hose attachment 13 mm.

Spare parts kit is Art-Nr. 4606-101.

Accessories

Service-kit for foot pump BABY WHALE AK4610
Accessories for foot pump WHALE BABY.

€38.90 *
EPDM freshwater hose
High-quality drinking water hose made of smooth EPDM rubber that is resistant to heat, abrasion and weathering. Lightweight, flexible (bending radius 130 mm) and absolutely light-tight. The hose is food-safe and FDA-compliant, the material does not release any substances into the fresh water and is durable. Can be used in the temperature range -40°C to 100°C and in the pressure range up to 15 bar. Available in blue and red.

From €9.60 *
PVC hose (food safe)
Transparent PVC hose with cross-fabric insert of polyester yarn.Food safe, resistant to chemicals and oil.Temperature resistant from -5°C to +60°C.Also intended for pressurized water systems.

From €2.50 *
Hose clamp stainless steel
Solid stainless steel design - all pieces completely stainless.With hexagonal bolts for high torque, high tear resistance and elasticity.

From €1.80 *

Similar products

Foot pump FYNSPRAY
Inexpensive membrane pump for fresh water.Foot pump that delivers with every push, self-priming (max. 1.5 m).Output approx. 5 l/min.Hose attachment 13 mm.

€58.00 *
Foot pump GUSHER MK3 WHALE GP0550
Compact double-membrane pump that delivers on both lifting and pushing movements.Hose attachments are adjustable.Can also be used with salt water. Self-priming (max. 2 m)With good and very steady output, approx. 12 l/min.Hose attachment 13 mm. Spare parts kit is 4608-100.

From €104.90 *
Fresh water pump WHALE INLINE
Small 12 volt/24 volt pumps for simple drinking water systems.Two-sided hose attachment can be used for either 10 mm or 13 mm (adapter).Not self priming. Available in PREMIUM version for 12 and 24 volts or HIGH FLOW version with higher pump output (only for 12 volts).- low weight, is simply inserted into the pipe or hose system- can be used as a pressure booster in manual or electric pump systems- low power consumption and very quiet- for fresh and salt water

From €59.50 *
Pressure water pump SHURFLO NAUTILUS
This pump is specially developed for maritime use in pressure-water installations. Made in the USA by SHURFLO.Benefits:- for direct supply of one tap!- not dry self priming, must be installed at or below tank level,- dry-running safe single chamber pump,- output: 3,8 l/min,- sturdy motor,- very smooth performance, very silent- with hose nozzles for 10 mm tube.

€69.90 *
SHURFLO LO-FLO automatic fresh water pump
This compact automatic demand fresh water pump offers durability and dependability making it ideal for low volume, intermittent duty applications.The 105 pump self-primes up to 0,75 m / 2.5 feet vertical while delivering over 1.0 GPM.A 12 volt low power consumption motor, equipped with thermal protection and long life pressure switch rated to 2 bar / 30 PSI, provides high pump performance and reliability.Features:- Automatic Demand up to 2 bar / 30 PSI,- Dry self Priming up to 0,76 m vertical,- Long Life Pressure Switch,- Thermally Protected,- Delivers 4 l/min / 1.0 GPM,Dimensions: 173 x 100 x 62 mmHose fitting for 10 mm hose.

€99.90 *

Last seen products

More articles from this category

WHALE galley pump FLIPPER Mk4
Self-priming, smooth-running piston pump made from plastic.Twisting spigot, Maximum flow rate 7 l/min.Made for fresh water and sea water.Tube coupling 13mm.Spare parts kit is Art-Nr. 4602-101.

From €112.00 *
BABYFOOT pump WHALE GP4618
Proven membrane foot pump for fresh water.Delivers with every push, self-priming (max. 1.5 m), output approx. 5 l/min.Dimensions: D= 89 mm; height 70 mm;Hose attachment 13 mm. Spare parts kit is Art-Nr. 4606-101.

€52.90 *
Foot pump GUSHER MK3 WHALE GP0550
Compact double-membrane pump that delivers on both lifting and pushing movements.Hose attachments are adjustable.Can also be used with salt water. Self-priming (max. 2 m)With good and very steady output, approx. 12 l/min.Hose attachment 13 mm. Spare parts kit is 4608-100.

From €104.90 *
WHALE Galley Pump MK6
Self-priming, perfectly smooth-running piston pump.Piston and spigot are made from aluminium. Height adjustable from 90 to 250 mm.Utilizing the small mounting base the pump can easily be installed between two sinks.Spigot length 125mm. Tube coupling 13 mm.Maximum flow rate 8 l/min.Qualified for fresh and salt water.Spare parts kit Art-Nr. 4609-100.

From €72.90 *
FYNSPRAY Galley pump CLASSIC
Classic solid brass galley pump.Above-table model, outlet and pump handle adjustable to any angle.Combined hose attachment for 16 mm or 19 mm hose.Spare parts kit is Art-Nr. 4613-100.

From €299.00 *
Foot pump FYNSPRAY
Inexpensive membrane pump for fresh water.Foot pump that delivers with every push, self-priming (max. 1.5 m).Output approx. 5 l/min.Hose attachment 13 mm.

€58.00 *
FYNSPRAY Galley pump ULTRA
Functional plastic piston pump.The swiveling spout and the pump's pistons are made of chromed brass.Hose attachment 13-16 mm.White plastic body.Spare parts kit is Art-Nr. 4644-100.

From €98.00 *
FYNSPRAY Galley pump NELSON
Proven piston pump with handle operation.Plastic, available in white or black.Spout and handle of chromed brass, self-priming.Hose attachment 13-16 mm. Spare parts kit is Art-Nr. 4644-103.

From €109.00 *
FYNSPRAY Galley pump AUCKLAND
A beautiful and practical heavy brass hand pump for the galley. Above-table model with vertical pump and swiveling spout. Polished or chromed finishes available. Also intended for salt water.Hose attachment 13-16 mm.Output approx. 0.07 l/stroke.Height inserted: 115 mm.Height extended: 215 mm.An aesthetic embellishment, exclusive by TOPLICHT - not just for the pantry on traditional ships.Spare parts kit is Article-No. 4644-104. 

From €199.00 *