Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Brass tank ventilation bent

from €24.95*

€24.95*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

surface
version
length (mm)
installation-Ø (mm)
Stk
Bent tank vent.
Brass, polished or chromed finish.
All vents have metal sleeves.
Intended for a maximum hull thickness of 15 mm.
Gland for hose D = 16 mm.
Available with the gland bent upwards or downwards.
Show 4 articles
📖 View article in the TOPLICHT catalogue

Bent tank vent.
Brass, polished or chromed finish.
All vents have metal sleeves.
Intended for a maximum hull thickness of 15 mm.
Gland for hose D = 16 mm.
Available with the gland bent upwards or downwards.
Questions about the product?

Accessories

Fuel whistle
Fuel whistle
This practical fitting should always be built in to the vent lines of fuel tanks.When filling, the escaping air makes a whistling noise. Shortly before the tank is full, it skips over to a trilling.The filling can thus be stopped in time, hindering the overflow of fuel and the pollution of the water.Material:Plastic,with 16 mm hose attachments on both sides,length 95 mm.

€44.90 *
Details

Similar products

Brass tank ventilation straight
Brass tank ventilation straight
Straight tank vent. Brass, polished or chromed finish.Vent with metal sleeve.Intended for a maximum hull thickness of 15 mm.

From €17.95 *
Details
Nylon tank ventilation
Nylon tank ventilation
Nylon tank vent, max. wall thickness 15 mm.

€5.75 *
Details
Brass tank ventilation sunken straight
Brass tank ventilation sunken straight
Fully countersunk tank vent fitting.Brass. Polished or chromed finish.All vents have metal sleeves.Intended for a maximum hull thickness of 15 mm.

From €20.96 *
Details
Brass tank ventilation sunken bent
Brass tank ventilation sunken bent
Bent fully countersunk tank-vent fitting.Brass. Polished or chromed finish.All vents have metal sleeves.Intended for a maximum hull thickness of 15 mm.Available with gland above or below.

From €27.95 *
Details

Last seen products

More articles from this category

Brass tank ventilation straight
Brass tank ventilation straight
Straight tank vent. Brass, polished or chromed finish.Vent with metal sleeve.Intended for a maximum hull thickness of 15 mm.

From €17.95 *
Details
Brass tank ventilation bent
Brass tank ventilation bent
Bent tank vent.Brass, polished or chromed finish.All vents have metal sleeves.Intended for a maximum hull thickness of 15 mm.Gland for hose D = 16 mm.Available with the gland bent upwards or downwards.

From €24.95 *
Details
Nylon tank ventilation
Nylon tank ventilation
Nylon tank vent, max. wall thickness 15 mm.

€5.75 *
Details
Brass tank ventilation sunken straight
Brass tank ventilation sunken straight
Fully countersunk tank vent fitting.Brass. Polished or chromed finish.All vents have metal sleeves.Intended for a maximum hull thickness of 15 mm.

From €20.96 *
Details
Brass tank ventilation sunken bent
Brass tank ventilation sunken bent
Bent fully countersunk tank-vent fitting.Brass. Polished or chromed finish.All vents have metal sleeves.Intended for a maximum hull thickness of 15 mm.Available with gland above or below.

From €27.95 *
Details
Stainless steel shell ventilator
Stainless steel shell ventilator
Made of plate stainless steel (AISI 316), polished.

From €4.95 *
Details
Tank ventilation stainless steel sunken straight
Tank ventilation stainless steel sunken straight
Countersunk design, stainless steel (AISI 316) bright polished. The ventilation system has a flame protection screen and a spritz cap. Installation: From the outside with screws. The spritz cap can be turned depending on the installation situation.

€36.90 *
Details
Tank ventilation stainless steel sunken bent
Tank ventilation stainless steel sunken bent
Countersunk design, stainless steel (AISI 316) bright polished. The ventilation system has a flame protection screen and a spritz cap. The spritz cap can be turned depending on the installation situation. Installation: From the outside with screws.

€42.90 *
Details
Tank ventilation stainless steel sunken
Tank ventilation stainless steel sunken
Countersunk design, stainless steel (AISI 316) bright polished.The ventilation system has a flame protection screen and a spray cap.Depending on the installation situation, the spray cap can be rotated so that the hose connection can be used in any desired position.Installation: From the outside (hidden) with counter-clamp and two threaded bolts (wall depth, max. 15 mm).

€44.90 *
Details
Tank ventilation stainless steel bent
Tank ventilation stainless steel bent
Countersunk design, stainless steel (AISI 316) bright polished. The ventilation system has a flame protection screen and a spritz cap. Installation: From the outside with screws. Fuel tank ventilation for large hose diameters.

From €44.90 *
Details
Fuel whistle
Fuel whistle
This practical fitting should always be built in to the vent lines of fuel tanks.When filling, the escaping air makes a whistling noise. Shortly before the tank is full, it skips over to a trilling.The filling can thus be stopped in time, hindering the overflow of fuel and the pollution of the water.Material:Plastic,with 16 mm hose attachments on both sides,length 95 mm.

€44.90 *
Details
Tank ventilation stainless steel
Tank ventilation stainless steel
Countersunk tank vent of polished stainless steel (AISI 316), with 19 mm hose diameters.The vents have a flame-protection screen and a spray cover.Installation: from the inside with threads and nuts (max. wall thickness 15 mm).

€47.90 *
Details
GUIDI shell scupper vent
GUIDI shell scupper vent
Heavy gauge brass tank vent, straight design, with inch thread connection.

From €17.01 *
Details