90° plastic hose connector

Art. No.	for hose (mm)	Price (unit)	Delivery time	Note list	Buy

Plastic connector for tubes with identical diameters. The 90° elbow hose connector enables clean, parallel hose routing, e.g. in corners and narrow areas on board.

Questions about the product?

Accessories

Hose clamp stainless steel

Solid stainless steel design - all pieces completely stainless.With hexagonal bolts for high torque, high tear resistance and elasticity.

From €1.80 *

Details

More articles from this category

Plastic hose connector

Plastic connector for tubes with identical diameters.

From €1.95 *

Details

90° plastic hose connector

Plastic connector for tubes with identical diameters. The 90° elbow hose connector enables clean, parallel hose routing, e.g. in corners and narrow areas on board.

From €3.90 *

Details

3-way T-shaped plastic hose connector

Plastic fitting to connect hoses of equal diameters.

From €3.20 *

Details

3-way Y-shaped plastic hose connector

Plastic fitting to connect hoses of equal diameters.

From €3.90 *

Details

Hose connector VETUS

Reduction fitting for attaching hoses of various diameters.The fitting can be cut for connection from the largest to smallest diameters.

From €24.90 *

Details

Plastic hose connector/ reducer

Attachment piece for hoses of varied diameters.Plastic.

From €2.90 *

Details

Exhaust hose connectors straight/60° VETUS

Connectors specially made for water cooled exhaust pipes made from PVC.Also well suited to connect already existing and sound hoses with new exhaust components.Available straight and 60° angular.

From €17.90 *

Details

Elbow for WHALE and HENDERSON pumps

For direct, angled attachment to all WHALE and HENDERSON pumps as well as all accessories. Attachment with PVC glue is recommended.

From €19.90 *

Details

Hose nipple (NPT) MARELON

MARELON hose connector.Black.Straight design.American NPT threads, not compatible with standard BSP threads. *** MARELON fittings ***: Made in the USA of high strength, fiberglass-reinforced special plastic. MARELON is absolutely resistant to galvanic corrosion and thus exceptionally well suited for aluminum and steel hulls.MARELON is resistant to oil, diesel, waste, and saltwater. U.L. and A.B.Y.C. certified. Temperature range -40íC to +80íC. Beware: American NPT threads are not compatible with standard BSP threads!

From €4.90 *

Details

Hose nipple (BSP) MARELON

MARELON hose connector.Black.Straight design.Standard BSP threads.*** MARELON fittings ***: Made in the USA of high strength, fiberglass-reinforced special plastic. MARELON is absolutely resistant to galvanic corrosion and thus exceptionally well suited for aluminum and steel hulls.MARELON is resistant to oil, diesel, waste and saltwater. U.L. and A.B.Y.C. certified. Temperature range -40íC to +80íC.

From €9.95 *

Details

Hose nipple (NPT) MARELON

Angled hose nozzle of MARELON, black. Fittings of MARELON: Built in the USA of high-strength, fiberglass-strengthened special plastic. MARELON is totally resistant to galvanic corrosion and thus exceptionally well suited for aluminum and steel hulls. MARELON is also resistant to oil, diesel, waste and salt water. U.L. and A.B.Y.C. certified. Temperature range -40°C to +80°C. Note: American N.P. threads do not conform to standard BSP threads and are not compatible with them!

From €7.95 *

Details

Hose nipple (BSP) MARELON

Angled MARELON hose connector.Black.Standard BSP threads. *** MARELON fittings ***: Made in the USA of high strength, fiberglass-reinforced special plastic. MARELON is absolutely resistant to galvanic corrosion and thus exceptionally well suited for aluminum and steel hulls.MARELON is resistant to oil, diesel, waste and saltwater. U.L. and A.B.Y.C. certified. Temperature range -40íC to +80íC.

From €9.95 *

Details

Plastic pipe-to-hose fitting 90° external thread

Bent hose nozzle of gray plastic with exterior threads.

From €5.50 *

Details

Pipe-to-hose fitting with external thread TRUDESIGN

Outer thread BSP, hexagonal, colour black. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide. The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €4.50 *

Details

Pipe-to-hose fitting 90° external thread TRUDESIGN

Outer thread BSP, hexagonal, colour black, 90° angled fitting. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €7.95 *

Details

Elbow connector 90° internal/external thread TRUDESIGN

90° connector with female-male thread BSP.This fitting enables a space-saving installation.Colour: black. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €14.95 *

Details

Pipe-to-hose fitting 120° external thread TRUDESIGN

Outer thread BSP, hexagonal, colour black, 120° angled fitting. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €8.50 *

Details

Pipe-to-hose fitting 90° internal thread TRUDESIGN

Inner thread BSP, hexagonal, colour black, 90° angled fitting. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €14.90 *

Details

T-piece connector TRUDESIGN

The 1½" Threaded T-Piece features 2x internal threads and 1x external thread enabling them to be joined together to create manifolds - useful for multiple hose connections to a single ball valve & thru-hull fitting.The centre female thread is shorter and designed for use with AQUAVALVE tails giving the option of tail sizes from 19mm up to 38mm. NOTE: all AQUAVALVE tails that are used with the T-piece do not face-seal using the Red or Blue washer as they do when used in Aquavalves. Instead, use a suitable thread sealant or PTFE tape to seal threads. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

€17.30 *

Details

Connector 3 way TRUDESIGN

3-Way connector with 1 1/2" inner BSP-thread, ideal when different sized hoses need to be connected. Four different size TRUDESIGN AQUAVALVE tails can be screwed in to suit hose size and instilation. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide. The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

€39.50 *

Details

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm