One common reason for water intrusion onboard are broken hose connections at the sea cocks.Our soft-wood plugs can be easily tumbled in and stop the water. The set is made up of plugs in graded diameters. Lengths between 40 and 110 mm.
LEAK HERO is a mastic sealant for closing leaks in case of emergency.The wax-like material comes in a plastic container and is ready for use. It is easily applied to or stuffed into the leak directly from the container.Sticks strongly to most surfaces, also in wet surrounding and under water.Perfect material to stop water leaking into holes in the hull, plank seams, faulty through-hulls ...Should be carried in each emergency toolbox on board.Only for emergencies! Later the leak must be repaired professionally. - Closes a leakage in seconds - Cures leaks in case of emergency - Easy to use - ready for use - Sticks to wet surfaces.For each container sold 1 Euro is donated to German Lifeboat Association (DGzRS).Container with 625 ml.
The STA-PLUG is a timely solution for such emergencies as leaks and water breaches in a variety of boat types. The plug, from the manufacturer FORESPAR, is specially developed of soft flexible material in the shape of a cone, so that it can fit in the most unusual hull breaches after the motto "insert, push & twist". Whether it's a round hole due to a mechanical failure or a crack in the hull, the STA-PLUG fits the shape of the leak. Unlike classic wooden plugs, the soft cone can be squeezed together by hand or cut into a shape that fits the hole to stop the water flow.Dimensions: height 230 mm, largest diameter 120 mm.STA-PLUG does not guarantee to stop all leaks. It is meant to be one of the safety means on board besides others (like a bilge pump of sufficient dimension). Not to be used for leaks in the fuel system.
With the red silicone disk, leaks between 6 and 20 cm in size can be sealed quickly and easily.The silicone disk with a diameter of 26 cm is inserted through the leak from the inside to the outside with its soft grip-coated stainless steel handle. The water pressure presses the disk into place.The five-meter-long tensioning strap can be used to lash the leak protection washer inside the yacht so that it is securely fixed in position. Alternatively / additionally, a piece of wood can be passed through the U-nut at the end of the handle and clamped.The bow nut at the end of the handle is also made of stainless steel.
Scupper plugs are used to temporarily seal open scuppers in order to prevent the uncontrolled outflow or ingress of liquids. They are particularly useful in situations where fluids - such as oil - need to be contained and collected during operations or in the event of leaks on board. Designed for a tight fit, scupper plugs can be quickly and securely inserted into scupper openings and easily removed when needed. In addition to their use on tankers, they are also suitable for maintenance work, emergency response, or for temporarily sealing pipes and drains.Plugs with adjustable width, made of NBR rubber and galvanised steel.Large wing nut for adjusting the diameter, with flow-through option thanks to unscrewable cover. Exception: The smallest plug 6330-025 has no passage.Properties of the NBR rubberMaximum temperature: -30°C +120°CResistant to:- Mineral oil products with an aromatic content of up to 50- Aromatic and chlorinated hydrocarbons and solvents- Oil and grease-resistant foodstuffsNot resistant to:- Solar radiation
