through hulls made from brass

Test

Brass thru-hull, inner curvature/ long

Made of brass (seawater-resistant copper alloy CW602N - CuZn36Pb2AS), slightly inward curved face. Slightly recessed flange. For insertion into the hull. With sturdy washer.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €12.90 *

Details

Thru-hull hose fitting polished or chromed

Through-hull with attached hose nozzle. Made of brass (seawater resistant brass, depending on manufacturer CW602N - CuZn36Pb2AS or CW625N - CuZn35Pb1,5AlAs).Comes in rolled brass or with a chromed finish.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €11.00 *

Details

Drain plug brass

Polished brass drain plug. These drain plugs have long flanges and locknuts for screwing them through the outer hull.

€17.50 *

Details

Brass thru-hull

Thru-hulls made of brass (seawater-resistant copper alloy CW625N - CuZn35Pb1,5AlAs). Flange with flat bottomside.Further thread diameters can be found under similar products in the product group "brass thru-hull long".Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €13.90 *

Details

Brass stainer for thru-hull

Strong round strainer for thru-hull/ water intake, slotted. Made of brass, (seawater-resistant copper alloy CW602N - CuZn36Pb2AS)

From €9.90 *

Details

Brass thru-hull long

High-quality, thick-walled thru-hull fitting made of brass (seawater-resistant copper alloy CW602N - CuZn36Pb2AS).Wide, flat flange bottomside. With washer.Thread length: 100 mmThread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €20.90 *

Details

Brass thru-hull with strainer

Sturdy, high quality through-hull with fixed sieve. Made of brass (seawater-resistant copper alloy CW602N - CuZn36Pb2AS).Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €22.90 *

Details

Brass thru-hull short

Thru-hull made from brass (seawater-resistant copper alloy CW625N - CuZn35Pb1,5AlAs). Short, standard threads.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €9.90 *

Details

Drain plug / through-hull

Very robust, thick-walled, polished-brass drain plug.This drain plug is screwed through the outer wall with a long flange and nut and can also be used as a through-hull fitting.Screw plug with strong handle and long threaded piece.

From €16.90 *

Details

Brass stainer for thru-hull

Strong strainer for thru-hull, made of brass, slotted.

€33.90 *

Details

Brass thru-hull short flat/short

Made from brass, (seawater-resistant copper alloy CW625N - CuZn35Pb1,5AlAs)Short design. Flat-head, countersunk.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €9.50 *

Details

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm