Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Brass thru-hull short flat/short

Borddurchführungen Messing flach/kurz
Borddurchführungen Messing Innenwölbung

from €9.50*

€9.50*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 Tag

In stock

L (mm)
thread size (inch)
Stk

Made from brass, (seawater-resistant copper alloy CW625N - CuZn35Pb1,5AlAs)
Short design. Flat-head, countersunk.

Thread type: BSP
Thread form: parallel
The thread sizes are nominal sizes, they do not indicate the thread diameter.

more information
Show 7 articles
📖 View article in the TOPLICHT catalogue


Made from brass, (seawater-resistant copper alloy CW625N - CuZn35Pb1,5AlAs)
Short design. Flat-head, countersunk.

Thread type: BSP
Thread form: parallel
The thread sizes are nominal sizes, they do not indicate the thread diameter.

Questions about the product?

Similar products

Brass thru-hull, inner curvature/ long
Brass thru-hull, inner curvature/ long
Made of brass (seawater-resistant copper alloy CW602N - CuZn36Pb2AS), slightly inward curved face. Slightly recessed flange. For insertion into the hull. With sturdy washer.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €12.90 *
Details
Brass thru-hull short
Brass thru-hull short
Thru-hull made from brass (seawater-resistant copper alloy CW625N - CuZn35Pb1,5AlAs). Short, standard threads.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €9.90 *
Details
Brass thru-hull
Brass thru-hull
Thru-hulls made of brass (seawater-resistant copper alloy CW625N - CuZn35Pb1,5AlAs). Flange with flat bottomside.Further thread diameters can be found under similar products in the product group "brass thru-hull long".Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €13.90 *
Details
Brass stainer for thru-hull
Brass stainer for thru-hull
Strong round strainer for thru-hull/ water intake, slotted. Made of brass, (seawater-resistant copper alloy CW602N - CuZn36Pb2AS) 

From €9.90 *
Details
Brass stainer for thru-hull
Brass stainer for thru-hull
Strong strainer for thru-hull, made of brass, slotted.

€33.90 *
Details
Ball valve CR-brass
Ball valve CR-brass
High-quality brass ball valve with full passage. All components are made from a corrosion resistant brass alloy CW602N - CuZn36Pb2AS.On both ends with BSP internal thread according to ISO 228, the ball hard chromed with sealant shells from PTFE. Hereby a long lasting light operation is guaranteed.The lever is made from steel and is protected from corrosion by a special PVC coating.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €19.95 *
Details
Skin Fitting Installation Tool
Skin Fitting Installation Tool
For installation or removal of thru-hulls that have two appropriate lugs in the passageway. The tool can be used to conveniently hold the bushings in place when tightening or loosening the locknut. The tool can also be inserted from the inside, so that a second person is not required to hold the thru-hull fitting from the outside during installation or removal.Material: galvanised steelImportant: The inside diameter of thru-hull fittings may differ due to material thickness and manufacture. To ensure that the tool can be inserted, the inside diameter of the diffuser must be known and correspond to the outside diameter D of the installation tool specified in the table.Suitable for these Toplicht's thru-hulls with the corresponding thread:Thru-hulls stainless steel: 1967-013, -019, -025, -032, -038, -0501962-013, -019, -025, -032, -038

From €10.90 *
Details

Last seen products

More articles from this category

Brass stainer for thru-hull
Brass stainer for thru-hull
Strong round strainer for thru-hull/ water intake, slotted. Made of brass, (seawater-resistant copper alloy CW602N - CuZn36Pb2AS) 

From €9.90 *
Details
Brass stainer for thru-hull
Brass stainer for thru-hull
Strong strainer for thru-hull, made of brass, slotted.

€33.90 *
Details
Brass thru-hull, inner curvature/ long
Brass thru-hull, inner curvature/ long
Made of brass (seawater-resistant copper alloy CW602N - CuZn36Pb2AS), slightly inward curved face. Slightly recessed flange. For insertion into the hull. With sturdy washer.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €12.90 *
Details
Brass thru-hull short
Brass thru-hull short
Thru-hull made from brass (seawater-resistant copper alloy CW625N - CuZn35Pb1,5AlAs). Short, standard threads.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €9.90 *
Details
Brass thru-hull
Brass thru-hull
Thru-hulls made of brass (seawater-resistant copper alloy CW625N - CuZn35Pb1,5AlAs). Flange with flat bottomside.Further thread diameters can be found under similar products in the product group "brass thru-hull long".Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €13.90 *
Details
Thru-hull hose fitting polished or chromed
Thru-hull hose fitting polished or chromed
Through-hull with attached hose nozzle. Made of brass (seawater resistant brass, depending on manufacturer CW602N - CuZn36Pb2AS or CW625N - CuZn35Pb1,5AlAs).Comes in rolled brass or with a chromed finish.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €11.00 *
Details
Brass thru-hull with strainer
Brass thru-hull with strainer
Sturdy, high quality through-hull with fixed sieve.  Made of  brass (seawater-resistant copper alloy CW602N - CuZn36Pb2AS).Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €22.90 *
Details
Brass thru-hull long
Brass thru-hull long
High-quality, thick-walled thru-hull fitting made of  brass (seawater-resistant copper alloy CW602N - CuZn36Pb2AS).Wide, flat flange bottomside. With washer.Thread length: 100 mmThread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €20.90 *
Details
Drain plug brass
Drain plug brass
Polished brass drain plug. These drain plugs have long flanges and locknuts for screwing them through the outer hull.

€17.50 *
Details
Drain plug / through-hull
Drain plug / through-hull
Very robust, thick-walled, polished-brass drain plug.This drain plug is screwed through the outer wall with a long flange and nut and can also be used as a through-hull fitting.Screw plug with strong handle and long threaded piece.

From €16.90 *
Details
Brass thru-hull short flat/short
Brass thru-hull short flat/short
Made from brass, (seawater-resistant copper alloy CW625N - CuZn35Pb1,5AlAs)Short design. Flat-head, countersunk.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.

From €9.50 *
Details