Skip to main content


Consumable material for the TROBOLO compost separation toilet.

The litter consists of sawdust (80% pine, 20% alder), which is produced in the TROBOLO factory. The litter binds moisture and residual odours in the solid waste container and provides a natural wood scent. No (electrical) exhaust air system is required when using bedding.

The 25 litres of litter (sufficient for 85-115 uses) are supplied in an ecological kraft paper bag.

The 25 litre litter is also available in combination with ten compostable inlays.


The inlays (bin liners) effectively protect the 6.5 litre solid waste container from soiling and significantly simplify disposal. They are available in two versions:

The black inlays are made from recycled polypropylene. They are tear-proof, resistant to liquids and also suitable for long emptying intervals. Solid waste (such as nappies) can be disposed of in them with the residual waste. The roll of 20 inlays can be stored in the inlay and toilet paper dispenser of the TROBOLO WandaGo compost separation toilet so that they are always to hand.

The beige inlays are made from corn starch. They are completely compostable. A maximum emptying interval of one week is recommended. The solid waste can be disposed of with the bag in the organic waste bin, a composter or on a compost heap. The roll of 10 inlays can be stored in the inlay and toilet paper dispenser of the TROBOLO WandaGo compost separation toilet so that it is always to hand.

Similar products

TROBOLO WandaGO compost separating toilet
The WandaGO compost separation toilet from TROBOLO is an easy-to-use, convenient alternative to chemical toilets or the use of a faeces tank in areas where the discharge of waste water is prohibited.• Extra compact transport dimensions• Weighs only 4.2 kg• Adjustable seat height of 306 mm or 436 mm• Self-sufficient operation without water, chemicals or electricity• Reliable separation of urine and solids• Odourless and spill-proof thanks to TROBOLO SafeShell System®• Ergonomically shaped toilet seat for high comfort• Weatherproof and highly robust• Easy and hygienic emptying and cleaning• Level indicator for the urine• Practical holder for urine diverter in the lid• Fastening system for safe transportation• Firmly closing toilet lid• Can be used with regular toilet paper• Includes one roll of inlays • Tested load-bearing capacity of 150 kgDimensions when closed height 314 mm, depth 382 mm, width 341mmMin. seat height: 306 mmMax. seat height: 436 mmTested load-bearing capacity: 150 kgWeight: 4.2 kg.CapacityMaximum number of usages through defecating: 8-12 usagesMaximum number of usages through urinating: 10-20 usagesVolume of the container for solids: 6.5 litresVolume of the container for liquids: 4.6 litresLitter and inlays can be found under "Accessories" further down on this page.

€199.00 *
TROBOLO DIY set for compost separating toilet
With a little manual dexterity, the TROBOLO DIY set can be used to install a compost separation toilet in a (wooden) body.The "inner workings" made of plastic components disappear from view and only the wooden toilet lid remains visible in the wooden interior of the yacht, van or tiny house.The compost separation toilet is an easy-to-use, convenient alternative to chemical toilets or the use of a faeces tank in areas where the discharge of waste water is prohibited.The advantages of a separating toilet at a glance:Connection-free use without electricity, water, chemicals or faeces tanksEasy, convenient use like a conventional toiletReliable separation of urine and solidsOdourless operation thanks to the use of litter or an exhaust air system for the solids containerEasy and hygienic emptying and cleaning of the solids and liquid containersEasy disposal of toilet wasteComposting of toilet waste is also possibleNo water or electrical connections, onboard outlets or separate faeces tanks are required.The DIY set consists of:1x toilet seat with lid (both made of wood)1x separating toilet insert (grey)1x cutting template for the installation of the separating toilet insert1x filter strainer and hose connection with integrated filter strainer for DN321x liquid container, volume 4.6 litres (maximum 10 to 20 uses through urination)1x solids container, volume 6.5 litres (maximum 8 to 12 uses through defecation). Recommended emptying interval of the solids container: 5 to 10 days1x Assembly instructions for the urine-diverting toilet insert1x Instructions for use and care instructions for the urine-diverting toilet insertFurther down on this page under "Accessories & spare parts" you will find a spill stop for the liquid container, an exhaust air duct set and the consumables litter and inlays.  

€169.00 *

Last seen products

More articles from this category

JABSCO COMPACT / COMFORT Service-Kits
Service Kits for the JABSCO toilets COMFORT and COMPACT. Please note the date of manufacture of your toilet.

From €59.90 *
JABSCO Kompakt Seat & Cover
WC seat and cover for the small bowl (Kompakt) from JABSCO.This toilet seat fits both manual toilets JABSCO KOMPAKT, and electric toilet JABSCO QUIET FLUSH KOMPAKT.

€94.90 *
JABSCO TWIST'N'LOCK Spare Hand Pump 29040-3000
The spare hand pump TWIST'N'LOCK for the JABSCO toilets COMPACT and COMFORT with their safety system suppress the siphoning effect through a simple 90° turn of the handle.

€119.00 *
JABSCO KOMFORT Seat and Cover
WC seat and cover for the bigger bowl (komfort) from JABSCO.This toilet seat fits both manual toilets JABSCO KOMFORT, and electric toilet JABSCO QUIET FLUSH KOMFORT.

From €125.00 *
JABSCO QUIET FLUSH Service Kit 90197-00000
Service kit for JABSCO QUIET FLUSH marine toilets COMPACT and COMFORT. The Service kit includes: - 1 x Bowl O-Ring Seal, - 1 x Joker - Valve, - 1 x O-ring, - 1 x Seal, - 2 x Washer.

€49.90 *
Servicekit 530 for toilet RM 69 STANDARD
Spareparts for the marine toilett Raske & van der Meyde RM69 STANDARD. The service kit 530 includes: Nr. 516 Inlet valve, Nr. 517 Outlet valve, Nr. 518 Check valve, Nr. 525 Bumper washer, Nr. 527 shaft seal, Nr. 529 Piston ring, Nr. 535 O-ring for lever.

€47.00 *
Spare parts for LAVAC-ZENITH toilet
Accessories and replacement parts for LAVAC ZENITH onboard toilets:We have even more replacement parts in stock.

From €19.00 *
Bilge pump HENDERSON/WHALE MK5 T/A
Proven bilge pump with robust housing of white plastic for mounting on the bulkhead (bulkhead pump), especially suited for the installation in the sanitary areas. The efficient membrane pump is easy to maintain without tools through the large screw-off inspection port. Self priming up to 4,5m, maximum delivery height: 4,5m. For hose fittings of 38mm. Very well suited as a head pump, for example, for LAVAC POPULAR or ZENITH toilets (vacuum pumps). Type HENDERSON MK5 T/A, white.

€139.00 *
Bilge pump HENDERSON/WHALE MK5 U/D under deck
Proven bilge pump with robust housing of white plastic for mounting behind the bulkhead or below the deck with through reaching pump handle (bulkhead pump, below deck pump), especially suited for the installation in the sanitary areas. The efficient membrane pump is easy to maintain without tools through the large screw-off inspection port. Self priming up to 4,5m, maximum delivery height: 4,5m. For hose fittings of 38mm. Very well suited as a head pump, for example, for LAVAC POPULAR or ZENITH toilets (vacuum pumps). Type HENDERSON MK5 U/D, white.

€159.00 *
Waste water pump JABSCO 50890
Robust diaphragm pump for extracting sewage from the pump specialist JABSCO. Dry self-priming up to 3.0 m. Full passage due to the use of lip valves. Universal and flexible installation, as both the pump head and the hose direction can be adjusted as required.Dimensions L x W x H: 278 x 161 x 132 mm. Available for 12 V or 24 V.

From €319.00 *
Spare parts for LAVAC-POPULAR toilet
Accessory for LAVAC POPULAR onboard toilets: Available spare part sets:* Seat and cover of white plastic, complete with seals, * Seat or cover alone, * Seals for seat or cover,* Plastic hinge sets (please ask for the matching model),* Complete seal set,* Seat and cover complete with seal and hinge set. A detailed view of the table can be found under "Downloads & Information".

From €29.90 *
Service-kit for BABY BLAKE
Spares for the famous BABY BLAKES toilet.Please check the attached PDF at "Downloads & informations" for contents of this kit.

€399.00 *
Servicekit for toilet VICTORY BLAKES TBV0881
Blakes Victory Extended Cruising Spares Kit. Included is a 56-page ‘Owners Handbook’ with many useful installation, usage, maintenance and repair tips for BLAKES marine toilets.Parts:1 x TBB7705 Hose connection2 x TBB7300 Back connection washer2 x TBB7335 Hose clip1 x TBB7340 Copper washer1 x TBB7345 Asbestos Washer1 x TBB7350 Washer1 x TBB7355 Bucket Washer1 x TBB7360 Leather Washer 1"1 x TBB7385 Centre Weighted Rubber Ball1 x TBB7390 Joint4 x TBB7395 Fibre Washer4 x TBB7400 Rubber Washer6 x TBB7405 Rubber Washer1 x TBB7415 "O" Ring 3/8"1 x TBB7416 Lip Seal 3/8"1 x TBB7640 Gland Packing1 x TBB7370 Washer 1 1/2" Leather1 x SCX6989 Washer 2" Leather2 x TBV7875 Washer 5/8" Leather2 x TBV7880 Joint (Discharge Cylinder)2 x TBV7885 Bucket Washer (Discharge Pump)1 x TBV7890 Top Clack Valve (Discharge Pump)1 x TBV7895 Valve (Lower Clack Valve)1 x TBV7900 "O" Ring 5/8" (Discharge Pump)1 x TBV7901 Lip Seal 5/8" (Discharge Pump)1 x TBBLIT Handbook

€399.00 *
Toilet seat and lid for BABY BLAKE
Oval Seat & Cover c/w Buffers. Includes complete Hinge Assembly (TBB7252).Available in mahogany or white coated. Suitable for:Baby BlakeBlakes MinorBlakes Victory

From €998.00 *
Service-kit for MK5 HENDERSON/WHALE
Spares for diaphragm pump HENDERSON/WHALE MK5.

€68.50 *
Service kit for Y4 toilet RHEINSTROM
Standard service kit for toilets RHEINSTROM type Y4.Contents of the kit: Please check the pdf at "Downloads & informations".

€199.00 *
Seat and lid for the RHEINSTROM sea toilets
Accessories for RHEINSTROM toilets: White seat and lid (large).Suitable for all RHEINSTROM toilets.

€175.00 *
Service kit for Y3 toilet RHEINSTROM
Standard service kit for toilets RHEINSTROM type Y3.Contents of the kit:1 x Weight pressure valve plate Y2 G0102042 1 x Seal pressure valve plate Y2 A0102042 2 x O-ring 60 x 2 NBR 0103047 1 x O-ring 50 x 3,5 NBR 0103057 1 x pressure lip valve 0101052 1 x seal for Delrin piston Y3 0103051 1 x piston rod seal Y3 0103017 1 x plain bearing bush Y3 0103048 1 x seal for flush valve flap Y3 D0103034 1 x pressure piece for flush valve Y3 0103037 1 x retaining orifice Y8-10S 0111017 2 x plain bearing bush for changeover lever Y3 0103066 1 x O-ring 7,5 x 1.5 NBR 0103065 6 x plain bearing bush lever Y3 0103027 4 x plastic disc 0101006 1 x funnel seal round version 0103007

€139.00 *
JABSCO LITE-FLUSH Service-kit 58541-1000
Jabsco 58541-1000 Pulley and Belt Kit.New version: Pulleys made of aluminum. Compatible with the Jabsco toilet series 58500.Contains Small and Large Pulley, Belt and Clip.

€54.90 *
Service kit for JOHNSON AquaT
A service kit for the hand pump is available for the JOHNSON on-board toilet AquaT.The Service Kit includes:1 x Top Valve Gasket,1 x Base Valve Gasket,1 x Check Valve,1 x Seal Housing,1 x O-Ring Seal Housing,1 x O-Ring Piston,1 x O-Ring Lever,2 x O-Ring Plug,1 x Spring,1 x Bumper Washer Handle.

€79.90 *