Bronze mast traveller | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Art. No.	mast diam. (mm)	D2 (mm)	ring (mm)	hook (mm)	Price (unit)	Delivery time	Note list	Buy

Ring for lugger rigging, to hoist the yard (gaff).
Beautiful simple bronze fitting, welded, cleanly sewn by hand with leather.

The halyard suspension is constructed in such a way that the ring stays approximately horizontal under load and thus has little friction.

D2 should be approximately 1.2 times the size of the largest mast diameter.

Questions about the product?

Last seen products

More articles from this category

Parrel bead made from ash

Parrel bead made from ash

Made from turned ash wood, oval wood sphericals to make a parrel line for sails and gaffs.They can be strung onto a parrel line.Unfinished. To protect them, the parrel beads should be soaked in linseed or wood oil.Variations in the dimensions, due to the manufacturing process, are possible.

From €1.80 *

Half moon made from ash

Half moon made from ash

Made from ash wood.On flat-bottomed boats, half-moons serve to raise the mainsail throat with help from the halyard on downwind courses.The half moon is attached to the lower parrel line between the parrel beads, then the halyard is laid on the half moon.

From €20.80 *

Beechwood mast hoop untreated

Beechwood mast hoop untreated

The luff of a (gaff rigged) main sail is lashed to the mast with these wooden mast hoops.Traditional rings made from cold-bent beech-wood with long, overlapping openings, locked by stainless steel bolts.Suggestion for size determination:Inner diameter of the mast ring should be about 20% greater than the maximum mast diameter.

From €128.00 *

Reefing claw and bond-bridge SPRENGER

Reefing claw and bond-bridge SPRENGER

Strong stainless steel boom fitting for sailing boats and small yachts.The boom claw has four nylon rings to protect the boom and the sail.Material thickness: 6 mm.Made in Germany!

From €56.00 *

Brass reefing claw and bond-bridge

Brass reefing claw and bond-bridge

Classic boom fitting for sailing boats and small yachts with roller-reefing (with turning booms). The boom claw has four nylon rings to protect the boom and the sail.For simple sheet leads, use just one boom claw.By combining two boom claws, a complete, strong sheet car (lenght 300 mm) with three purchase points can be mounted, on which the mainsheet can be attached. Deliverable in two versions: a small one made from brass, cleanly polished or a bigger one made from aluminium bronze

From €116.00 *

Bronze mast fitting

Bronze mast fitting

Classic mast-fitting set for round masts and round, oval, or square booms.Made in England, from high-quality marine bronze.The mast fitting is made up of two strong bolted rings of cast bronze, polished, and the screwed-on gooseneck.The (undrilled) boom fitting is cast in a single piece and can be either embedded in the boom or attached to the outer boom.The connected gooseneck is also a cleanly made cast piece.We offer this fitting mounted as a complete set, with a welded-on reefing hook fitting (for two reefs).D2 is the mast diameter.This fitting has a hand-crafted design and finish, and matches very well with our gaff saddle fitting.Other sizes and combinations are available on demand.

From €729.01 *

Gaff saddle fitting

Gaff saddle fitting

Traditional gaff claw (claw fitting).The sturdy gaff saddle has a hand sewn leather cover, which protects the mast finish and may be greased to ease sliding.The gaff end fitting is cast of marine bronze and hand-polished.Clew fitting with ring for the halyard and for the sail, made of welded bronze, shiny polished.This hand-finished fitting is a functional piece of art for any traditional boat or yacht.The complete set matches our mast and boom fittings in size and finish.D2 should not be less than 1.15 times the size of the largest mast diameter.Not appropriate for high peak or Gunter riggings. The inclination of the gaff should not be less than 40°.Other sizes and combinations are available on demand.

From €719.00 *

Bronze mast traveller

Bronze mast traveller

Ring for lugger rigging, to hoist the yard (gaff).Beautiful simple bronze fitting, welded, cleanly sewn by hand with leather.The halyard suspension is constructed in such a way that the ring stays approximately horizontal under load and thus has little friction.D2 should be approximately 1.2 times the size of the largest mast diameter.

From €174.00 *

Mast hoops ashwood, steamed and oil treated

Mast hoops ashwood, steamed and oil treated

Traditional mast hoops for bending the luff of a gaff sail on the mast.Made on an English boat yard from steamed ash wood ledges in layers, hot bent and oiled. Because the hoops come not glued, but only temporarily secured with a bolt, they can simply be mounted around the standing mast and riveted with the enclosed copper rivets on board.The hoops are treated with linseed oil. We recommend to varnish or oil treat them before installation. The inner diameter of the mast hoops should be approx. 20% larger than the maximum mast diameter.

From €90.25 *

Gunmetal mast band with 2 eyes DAVEY

Gunmetal mast band with 2 eyes DAVEY

Mast or bowsprit fitting with two attachment eyes for stays, shrouds, etc.Cylindrical. Hand-polished cast bronze.Undrilled. 2 eyes.

From €68.00 *

Galvanized mast band with 2 eyes DL3416

Galvanized mast band with 2 eyes DL3416

Mast or bowsprit fitting with two attachment eyes for stays, shrouds, etc. Cylindrical.Hot-dip galvanized cast iron.Undrilled. 2 eyes.

€47.40 *

Bronze mast band with 4 eyes DAVEY

Bronze mast band with 4 eyes DAVEY

Classic mast bands made of cast in gunmetal, also suitable as a jib boom fitting.With four fixing eyes for stays, shrouds etc..Cylindrical fitting that is best mounted on a spar recess.Undrilled.

From €78.00 *

Bronze boom fitting

Bronze boom fitting

Made from cast bronze, equipped with a strong strap for the main sheet block.Surface: tumbled with matt finish, European make.

€278.00 *

Boom fitting bronze

Boom fitting bronze

One-piece fitting, matches our gooseneck fittings (match the bolt diameter D4).Polished bronze.Also fits slightly tapered booms.

€131.99 *

Bronze sliding goosneck

Bronze sliding goosneck

Functional bronze gooseneck applicable for small yachts.Matte-rolled finish. Track rails to screw on, car with holding screw as well as square spike that can be plugged on a wooden or aluminium boom.Track: L = 300 mm, W = 22 mm. Spike: 12 x 12 mm, L = 100 mm.This fitting allows the mainsail to be reefed by rotating the boom.The square socket in the boom (13 x 13 mm) has to be set up by the owner.

€118.00 *

Bronze reefing gear DAVEY

Bronze reefing gear DAVEY

This traditional three-part fitting of hand-polished cast bronze allows sails to be reefed by rolling them around the boom (simple roller reefing). Intended for yachts and small cruisers (with mainsail sizes up to about 10 square meters). The complete fitting is put together from three pieces. The boom can be removed from the tetrahedral fitting. To reef, the boom is simply pulled aft off the fitting and turned.The pieces must be installed separately: 1) Boom fitting forward (tack) for the the boom's diameter D1 = 50 mm with suitable space for the tetrahedron of the gooseneck fitting. 2) Boom fitting aft (clew) with the rolling frame for the topping lift and sheet; 3) Gooseneck with tetrahedral fitting, sized for various mast diameters: D2 = 50 to 87 mm.

From €89.00 *

Backstay lever HIGHFIELD DAVEY

Backstay lever HIGHFIELD DAVEY

The HIGHFIELD lever is a reliable bronze backstay turnbuckle.An absolutely classic fitting, built the same way for the past 100 years. Not only robust hand quality by the British manufacturer DAVEY & Co., but also a piece of art on any deck.The whole fitting is made by hand from bronze, sand-cast and extensively hand-polished and hand mounted.The backstay wire must be pressed or spliced onto the bronze thimble. With the clamping lever, the wire can then be brought down tight to the deck.In the tensioned position, the wire sits below the pivot of the turnbuckle. Thus the locking device is automatically secured. The optional two-piece release fitting (must be ordered separately, available for size 1) allows the (loose) backstay wire to be hooked directly to the turnbuckle.

From €320.00 *

Bronze Shroud Holder / Rigg Fitting

Bronze Shroud Holder / Rigg Fitting

The shroud hanger is a traditional mast fitting for holding shrouds that are slipped over the mast with covered wire rope loops. The receiving width is 12mm. Heavy and solid, the fitting is made of cast bronze with a fine matt tumbled surface and has five countersunk holes with a diameter of 5 mm.For an additional charge, the fitting can also be supplied hollowed, i.e. precisely adapted to the required mast diameter. Just ask, we will be happy to advise you.

€179.00 *

Brass Mast Cleat / Jam Cleat WILMEX

Brass Mast Cleat / Jam Cleat WILMEX

Brass cleat with curved base for direct attachment to the spar (bearing radius 41 mm). In addition to being used as a mast cleat for halyards, it can also be used on the main boom to attach reefing tackles and stretchers or on the jib boom to attach the jib ringhaul or the water stay. The elegant cleat is produced by WILMEX and is designed for rope diameters of 10-14 mm.

€198.00 *

Bronze heavy duty mastbands EAST COAST

Bronze heavy duty mastbands EAST COAST

Strong mast fittings with a high breaking load that can also be used as bowsprit fittings. Made in England and finished in polished bronze. With very strong, drilled lugs and wide strap for secure fastening.Available with two or four lugs.

From €112.00 *

Request sent successfully

Request wasn't send - a error occured. Please try again.