HI-MOD insulator
1707*02 HI-MOD Isolator
1702*02 Gabelterminal HI-MOD
HI-MOD insulator
from €393.00*
€393.00*
Prices incl. VAT plus shipping costs
Available, delivery time: 1 Tag
In stock
Insulator for installation in stays and antenna wires. The Hi-MOD insulator has an internal ball-socket in the main body that threads onto the connecting stud. The nut is insulated from the stainless steel body by a Tufnol socket, preventing electrical transference to the insulator body. The Hi-MOD insulator meets or exceeds current electrical standards for marine backstay insulators.
PETERSEN STAINLESS RIGGING LTD, a manufacturer of high quality stainless steel rigging components, has developed the well known NORSEMAN terminals under the new brandname HI-MODE.
These high precision terminals, manufactured in England from stainless steel 1.4404 (AISI 316L), are stronger dimensioned than the breaking load of the strongest wire fitting for them. The newly developed cone with crown ring enables the very simple and safe fitting to the wire with on-board means, that is without milling and pressing. There is no need anymore for sealants when fitting the wire and cones are reusable if undamaged. It is necessary to order special cones for wire constructions 7 x 19 und 7 x 7.
Additional designs of swageless compression terminals for wires up to 26 mm are available (prizes on request). A detailed application instruction comes with the shipment.
Show 5 articles
PETERSEN STAINLESS RIGGING LTD, a manufacturer of high quality stainless steel rigging components, has developed the well known NORSEMAN terminals under the new brandname HI-MODE.
These high precision terminals, manufactured in England from stainless steel 1.4404 (AISI 316L), are stronger dimensioned than the breaking load of the strongest wire fitting for them. The newly developed cone with crown ring enables the very simple and safe fitting to the wire with on-board means, that is without milling and pressing. There is no need anymore for sealants when fitting the wire and cones are reusable if undamaged. It is necessary to order special cones for wire constructions 7 x 19 und 7 x 7.
Additional designs of swageless compression terminals for wires up to 26 mm are available (prizes on request). A detailed application instruction comes with the shipment.
Downloads
Insulator for installation in stays and antenna wires. The Hi-MOD insulator has an internal ball-socket in the main body that threads onto the connecting stud. The nut is insulated from the stainless steel body by a Tufnol socket, preventing electrical transference to the insulator body. The Hi-MOD insulator meets or exceeds current electrical standards for marine backstay insulators.
PETERSEN STAINLESS RIGGING LTD, a manufacturer of high quality stainless steel rigging components, has developed the well known NORSEMAN terminals under the new brandname HI-MODE.
These high precision terminals, manufactured in England from stainless steel 1.4404 (AISI 316L), are stronger dimensioned than the breaking load of the strongest wire fitting for them. The newly developed cone with crown ring enables the very simple and safe fitting to the wire with on-board means, that is without milling and pressing. There is no need anymore for sealants when fitting the wire and cones are reusable if undamaged. It is necessary to order special cones for wire constructions 7 x 19 und 7 x 7.
Additional designs of swageless compression terminals for wires up to 26 mm are available (prizes on request). A detailed application instruction comes with the shipment.
PETERSEN STAINLESS RIGGING LTD, a manufacturer of high quality stainless steel rigging components, has developed the well known NORSEMAN terminals under the new brandname HI-MODE.
These high precision terminals, manufactured in England from stainless steel 1.4404 (AISI 316L), are stronger dimensioned than the breaking load of the strongest wire fitting for them. The newly developed cone with crown ring enables the very simple and safe fitting to the wire with on-board means, that is without milling and pressing. There is no need anymore for sealants when fitting the wire and cones are reusable if undamaged. It is necessary to order special cones for wire constructions 7 x 19 und 7 x 7.
Additional designs of swageless compression terminals for wires up to 26 mm are available (prizes on request). A detailed application instruction comes with the shipment.
Similar products
Cone sets for HI-MOD terminals 1x19
From
€19.90 *
Cone sets for 1 x 19 strand wire rope with HI-MOD terminals. PETERSEN STAINLESS RIGGING LTD, a manufacturer of high quality stainless steel rigging components, has developed the well known NORSEMAN terminals under the new brandname HI-MODE.These high precision terminals, manufactured in England from stainless steel 1.4404 (AISI 316L), are stronger dimensioned than the breaking load of the strongest wire fitting for them. The newly developed cone with crown ring enables the very simple and safe fitting to the wire with on-board means, that is without milling and pressing. There is no need anymore for sealants when fitting the wire and cones are reusable if undamaged. These cone sets (cone and crown ring) are exclusively for using wire ropes with the construction 1 x 19 (wire for shrouds).
Cone sets HI-MOD for wire 7x7 and 7x19 (for terminals)
From
€17.30 *
PETERSEN STAINLESS RIGGING LTD, a manufacturer of high quality stainless steel rigging components, has developed the well known NORSEMAN terminals under the new brandname HI-MODE.These high precision terminals, manufactured in England from stainless steel 1.4404 (AISI 316L), are stronger dimensioned than the breaking load of the strongest wire fitting for them. The newly developed cone with crown ring enables the very simple and safe fitting to the wire with on-board means, that is without milling and pressing. There is no need anymore for sealants when fitting the wire and cones are reusable if undamaged.These cone sets can only be used for flexible 7 x 7 and 7 x 19 strand wire rope constructions.
Swageless eye terminal HI-MOD
From
€39.90 *
PETERSEN STAINLESS RIGGING LTD, a manufacturer of high quality stainless steel rigging components, has developed the well known NORSEMAN terminals under the new brandname HI-MODE.These high precision terminals, manufactured in England from stainless steel 1.4404 (AISI 316L), are stronger dimensioned than the breaking load of the strongest wire fitting for them. The newly developed cone with crown ring enables the very simple and safe fitting to the wire with on-board means, that is without milling and pressing. There is no need anymore for sealants when fitting the wire and cones are reusable if undamaged. It is necessary to order special cones for wire constructions 7 x 19 und 7 x 7. One Cone for wire 1 x 19 is included. Additional designs of swageless compression terminals for wires up to 26 mm are available (prizes on request). A detailed application instruction comes with the shipment.
More articles from this category
Isolator (POM)
From
€52.50 *
With this isolator backstays and shrouds can be made into effective radio antennas. The isolator must be installed in two intertwined wire eyes. The cleanly milled grooves thereby allow the wires a large bending radius, through which they are able to retain their strength.Made from the saltwater-resistant plastic Polyacetal (POM).
HI-MOD insulator
From
€393.00 *
Insulator for installation in stays and antenna wires. The Hi-MOD insulator has an internal ball-socket in the main body that threads onto the connecting stud. The nut is insulated from the stainless steel body by a Tufnol socket, preventing electrical transference to the insulator body. The Hi-MOD insulator meets or exceeds current electrical standards for marine backstay insulators. PETERSEN STAINLESS RIGGING LTD, a manufacturer of high quality stainless steel rigging components, has developed the well known NORSEMAN terminals under the new brandname HI-MODE.These high precision terminals, manufactured in England from stainless steel 1.4404 (AISI 316L), are stronger dimensioned than the breaking load of the strongest wire fitting for them. The newly developed cone with crown ring enables the very simple and safe fitting to the wire with on-board means, that is without milling and pressing. There is no need anymore for sealants when fitting the wire and cones are reusable if undamaged. It is necessary to order special cones for wire constructions 7 x 19 und 7 x 7. Additional designs of swageless compression terminals for wires up to 26 mm are available (prizes on request). A detailed application instruction comes with the shipment.
Insulator NORSEMAN
From
€296.00 *
Isolator for installation on antenna wires or stays which are used for antennas. Lloyd Register qualified.Skilled processing means the breaking load of the appropriate wires is not reduced.Approved Norseman terminals on both sides.