Stainless steel slip hook

Art. No.	for turnbuckle	M (mm)	L (mm)	D (mm)	Price (unit)	Delivery time	Note list	Buy

Strong hook for mounting on turnbuckles.
Following the principle of pelican hooks, these lever-like hooks can be loosened and tightened when under the load of a standing wire.

Turnbuckle is not supplied.

Questions about the product?

Last seen products

More articles from this category

Deadeye made from ash

Classic deadeye, turned from ash wood.We deliver the deadeye unfinished, with a rounded groove for wire, rope or round steel.

From €57.60 *

Details

Stainless steel / chromed bronze turnbuckle SELDEN

Heavy duty SELDEN turnbuckles with pressed stainless steel forks (typHASSELFORS) and a classic open body made from chromed aluminium bronze.The spar builder SELDEN developed this turnbuckle with UNF threads, because the combination of bronze body and stainless steel threaded forks guarantees that the turnbuckle can be turned, even under high loads, without seizing up.European brand-name product.Design: fork/fork. Further models on request.

From €61.95 *

Details

Bronze turnbuckle

Small turnbuckle with high breaking strength, made from manganese bronze.The open-body design allows easy installation by hand. The rods are stainless steel. Thread: BSF (British Standard Fine).

From €47.00 *

Details

Bronze turnbuckles high tensile

Bronze turnbuckle. Classic design with open body.The turnbuckle is made from high-tensile waterproof aluminum bronze.Very high breaking strength.Particularly the distortion parameters (Rp02) are about double those of stainless steel.In addition, these turnbuckles can be turned under high loads without seizing up.Comes with metric or standard UNF threads. These turnbuckles are supplied from different manufacturers. This results in slight difference in surface polish.

From €142.00 *

Details

Galvanized turnbuckle

Simple steel rigging screw, hot-dip galvanized closed body.Fork/fork design. The forks on the smaller rigging screws are galvanized.

From €7.80 *

Details

Galvanized turnbuckle eye-eye

Solid, hot-dip galvanized steel turnbuckle with closed body and counter nuts.Eye and eye ends.The long, thin bodies guarantee a large throw.From size M 22 up in solid forged design with beautiful, long and thin fork.Working load (SWL) = 1/5 the breaking load. Test certification available on request.Hint: The threads are partly cut again after hot-dip galvanizing and should therefore be well lubricated. After mounting and adjusting, it is a good idea to cover the open threads with tape.

From €39.80 *

Details

Galvanized turnbuckle fork-fork

Solid hot-dip galvanized turnbuckle with closed sleeve and locking nuts.Terminals: fork / fork.The long thin body guarantees a large throw.From size M 22 up, the turnbuckle is forged with nice long and thin forks.Working load (SWL) = 1/5 of the breaking load. Test certificate available on request.Hint: The threads are partly cut again after hot-dip galvanizing and should therefore be well lubricated. After mounting and adjusting, we recommend covering the uncovered threads with a sleeve.

From €15.90 *

Details

Galvanized turnbuckle fork-eye

Solid, hot-dip galvanized steel turnbuckle with closed body and counter nuts.One side fork terminal, one side eye terminal.The long, thin bodies guarantee a large throw.From size M 22 up in solid forged design with beautiful, long and thin fork.Working load (SWL) = 1/5 the breaking load. Test certification available on request.Hint: The threads are partly cut again after hot-dip galvanizing and should therefore be well lubricated. After mounting and adjusting, it is a good idea to cover the open threads with tape.

From €39.80 *

Details

M20 Turnbuckles OS stainless steel

Turnbuckle made from stainless steel (AISI316). Brand-name product from BERENDSEN STEEL, in Denmark. Electropolished.Metric threads, closed body with counter nuts, welded forks with split-pin bolts on both ends.

€219.00 *

Details

Lock nut BLUE WAVE

Flat, metric special nuts with very small outer dimensions, made from stainless steel (1.4401) for use as counter nuts for turnbuckles.

From €2.00 *

Details

Turnbuckles BLUE WAVE

High-gloss polished turnbuckle with closed body, made from 1.4401 (AISI316) stainless steel by the Danish manufacturer BLUE WAVE. Design: welded forks on both sides with pins. Metric threads with counter nuts. Further models on request.

From €29.60 *

Details

Turnbuckles PETERSEN stainless steel/bronze

Elegant high-strength shroud turnbuckle with classic open body. The chromed body is forged from high-quality aluminium-bronze. The stainless steel forks (1.4401/AISI316) are very cleanly and lavishly wrought entirely from solid material, without welds and their corresponding weak points. The standard UNF fine-threads ensure, through the combination of bronze body and stainless steel threaded fork, that the turnbuckle can be adjusted under high loads, with no danger of breakage. The turnbuckles are 10% to 20% stronger than the strongest wire shroud that could be used. Brand-name product from Europe. Design: fork/fork, other designs by request.

From €225.00 *

Details

Rigging screw hook

Simple turnbuckle with hook and eye. Open body. DIN 1480. Galvanized steel.Measurement variations are possible.

From €4.60 *

Details

Rigging screw hook stainless steel

Simple tensioner with hook/eye. Open body. DIN 1480. Polished stainless steel. Size differences are possible.

From €9.90 *

Details

Stainless steel turnbuckle (import quality)

Turnbuckle, made from stainless steel (AISI316), electropolished.Metric threads, closed body with counter nuts. Welded forks with split-pin bolt on both ends. Measurement variations are possible.

From €7.95 *

Details

Stainless steel slip hook

Strong hook for mounting on turnbuckles.Following the principle of pelican hooks, these lever-like hooks can be loosened and tightened when under the load of a standing wire.Turnbuckle is not supplied.

From €7.50 *

Details

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm