The DSC radio with integrated AIS/GPS/GNSS receiver is equipped with a variety of innovative features:Radio Control & Intercom via Your Smart DeviceUse the RS-M500 app (for iOS™/Android™) on your smartphone to remotely control some functions of your IC-M510E through WLAN. Up to three smartphones can be used as a wireless microphone or remote controller in substitute for a simple microphone. Intercom function between your smart device and the radio is also available.Integrated AIS Receiver*With its integrated AIS receiver the IC-M510E can show real-time AIS vessel traffic information on the display. You can directly make an individual DSC call to selected AIS targets from the AIS screen.Wide Viewing Angle Colour TFT LCDThe colour TFT LCD provides nearly a 180-degree viewing angle. The wide display has high-resolution characters and function icons. The night mode screen ensures good readability in low light conditions.New Sleek DesignThe IC-M510E is slim (depth: 53.6 mm) and easy to install in your boat. It’s all-new sleek design is suitable for either panel or trunnion mounting.Simplified Navigation FunctionThe Navigation function guides you to a specified waypoint or AIS target. You can assign up to 100 destinations as waypoints.Provides Clear, Loud AudioThe IC-M510E’s internal speaker enhances the received audio. The waterproof speaker provides superior sound quality with a wide frequency range for powerful, clear audio.Interface BOX for NMEA 2000™ and HailerThe optional CT-M500 wireless interface box provides NMEA 2000™ connectivity and Two-way Hailer/PA function. The CT-M500 and the radio can be connected through WLAN. This separate interface box option allows for flexibility in positioning the unit closer to the NMEA network connection point.AIS Target Call with MA-510TRWhen connected to the optional MA-510TR Class B AIS transponder, the AIS target call function allows you to make an individual DSC call without having to manually input an MMSI number.Other FeaturesActive Noise CancelingNMEA 0183/HS connectivity, NMEA 2000™ (CT-M500 required), Integrated GNSS receiver (Selectable from either internal receiver or use optional UX-241 GNSS antenna)IP68 advanced waterproofing (1 m depth of water for 60 minutes)Automatic Foghorn function (CT-M500 required)AquaQuake™ prevents audio degradation from a water-logged speakerSupplied speaker-microphone, HM-205RB can be connected to the rear panelExternal speaker connectionControlled with COMMANDMIC™ HM-195 (series with Distress button) or HM-229 series (without Distress button)Supports 4-digit channelsYou can find more technical details in the operating instructions (Bedienungsanleitung) as a pdf file further down on this page under "Downloads & Information".

An AIS transponder on your ship automatically receives information from other ships equipped with AIS or from coastal stations and transmits data about the movement and other information about your own ship. AIS-equipped vessels and buoys are displayed even if they are difficult to detect with a ship's radar. The MA-510TR can receive both Class A and Class B AIS signals, increasing your safety at sea.4.3-inch Color TFT LCDThe wide viewing, high resolution 4.3-inch color TFT display clearly shows your and other vessels’ positions. The day-mode display is readable in direct sunlight, and the night-mode display ensures good readability in the dark for further convenience.AIS Target List and Details The ‘Target’ list screen shows all detected AIS equipped vessels and targets. The ‘Danger’ list screen shows a list of vessels that are within six nautical miles of Closest Point of Approach (CPA) and sixty minutes of Time to Closest Point of Approach (TCPA) from your vessel. The ‘Friend’ list screen displays the detected AIS targets that you set as friends.Simplified Navigation Function The Navigation function guides you to a specified waypoint or AIS target. You can assign a maximum of 100 favorite fishing spots or destinations as waypoints. The Navigation function is simply started by just selecting a waypoint or an AIS target on the display. A navigation to a MOB-Waypoint is also possible.Individual DSC Call An individual DSC call can be sent by selecting an AIS target and voice channel on the MA-510TR. A compatible marine VHF radio is required for this function.USB ConnectivityAIS-Daten können über die USB-Schnittstelle auf der Rückseite des Transponders ausgegeben werden.Supplied GPS AntennaThe GPS receiver with SBAS function is integrated in the MA-510TR.NMEA 2000, NMEA 0183/-HS ConnectivityThrough the NMEA2000, NMEA0183 and USB interface, the AIS data can be passed to external chart plotters, marine radars, radios or other devices.. Collision Alarm FunctionWhen a vessel comes into the CPA or TCPA range, the vessel’s icon blinks on the plotter display and a beep sound is heard.Silent-ModeFor privacy and security, the transmission of the own ship's position data by the AIS transmitter can be temporarily switched off.Other FeaturesCompatible with both 12 V and 24 V power sourcesAnchor watch function sounds an alarm when your vessel is at anchor but has driftedIPX7 waterproof protection (up to 1 m depth of water for 30 minutes; except connectors)You can find more technical details in the operating instructions (Bedienungsanleitung) as a pdf file further down on this page under "Downloads & Information".

See and be seen even better!easyTRX3 Class B AIS transceiver with SOTDMA technology.With 5 watts of transmitting power, faster transmission rate of AIS protocols and SOTDMA technology, the new AIS Class B generation - easyTRX3 from the German manufacturer WEATHERDOCK improves your navigation and safety on board.The German sailing magazine "Yacht" judges in its AIS transponder comparison in issue 17/2023: "The easyTRX3 from WEATHERDOCK, which is available in a wide range of equipment variants to meet all requirements and whose range of functions can even be expanded at a later date, is probably the most versatile system among the black box solutions according to the SO(TDMA) standard".The robust, waterproof housing of the easyTRX3 offers one AIS transmitter and two AIS receivers. This ensures that both AIS frequencies are permanently transmitted and received in parallel.SOTDMA technology means that the easyTRX3 organises the free time slots in the AIS transmission procedure itself and reserves and keeps free the same space for the next transmission interval with the transmission.The unit can be conveniently configured already at home. The data connection to the PC via USB ensures the power supply at the same time. In this way, the internal memory can also be controlled and read out, in which all AIS sailing data can be stored - similar to a black box.With the easyTRX3 Manager app, all easyTRX3 settings can be made easily and conveniently using a smartphone or tablet.defining the static data (MMSI, name, call sign and type of vessel)Configuration of the interfaces (USB, NMEA0183, NMEA2000)Anchor and CPA alarm switched on and offIn addition to the basic version of the easyTRX3, there are versions with WiFi, LAN, FM, DAB+ and DVB-T2. Thanks to the modular design, additional functions can also be retrofitted to existing models at a later date.FeaturesAIS Class B SOTDMA time slot method5 watts radiated transmit powerFaster transmission intervals (depending on boat speed)Integrated antenna splitterIntegrated GPS antennaNMEA2000, NMEA0183 and USB port connectivityCPA alarm & anchor alarmInternal memory recording of trip data (black box)Configuration of the unit with USB power supply possibleReadout of the internal data memory possible with USB power supplyHandheld, robust and waterproof housingConforms to the new international standard IEC62287-2Technical data1 channel VHF transmitter2 channel VHF receiver (AIS frequencies: 161.975 MHz and 162.025 MHz)72 channel GNSS/GPS receiverchannel sensitivity: ≤ -112 dBmProtection class IP67 (dust and waterproof against temporary submersion)For installation below deckOperating temperature: -10 °C - + 55 °CGPS antenna connectorNMEA2000 Micro-C connectorNMEA output message: VDMTransmitting power: 5 wattsDimensions (L/W/H): 190 x 135 x 60 mmWeight: Approx. 700gApprovalsBSHIEC62287-2 Scope of deliveryAIS Class B easyTRX3 (basic version or plus options)Connection cable 18-pin (approx. 200 cm)Connection cable from easyTRX3 to VHF radio (approx. 100 cm)USB connection cable (approx. 180 cm)Short manualUser manual and software for programming for Windows PC and Apple Mac on internal memoryWiFi antenna (with WiFi option)DVB-T2 cable set (with DVB-T2 option)DAB+In the optional product version with DVB-T2 and FM radio, a DAB+ module is also installed. With this DAB+ module you are able to connect the antenna cable of a DAB+ receiver with F-connector to the easyTRX3. The module itself is a kind of antenna that is able to slightly amplify the incoming DAB+ signals before they are transmitted to the connected DAB+ receiver via the F-connector. However, the module does not include an antenna splitter for DAB+. The DAB+ signals are not received with the FM mast antenna and forwarded to the easyTRX3.The integrated GPS antenna is sufficiently powerful for most (GRP or wooden) yachts. However, depending on the installation location (especially on steel boats), an external GPS antenna (Article-No. 3920-029) may be required as a supplement. You will find this further down on this page under "Accessories".

The WEATHERDOCK antenna provides raw GPS data.The antenna mushroom is connected to a Class B AIS transceiver or transponder (e.g. easyTRX3) using the six metre long cable (can be extended up to 15 metres with RG213/U cable) with TNC connector.These require GPS raw data that is accurate to 1/1000 of a second. An active antenna supplies data via NMEA, e.g. to the chart plotter, which is only accurate to a maximum of 1/10 of a second.Features:Dimensions (H x Ø): 13 x 9 cm (antenna without base)Cable length: 6 mConnector: TNCOperating frequency: 1575.42 MhzDirectional characteristic, typical values: Zenith: +5 dBi, 10°: -1 dBiGain: approx. 27 dBSmoke figure: max. 2 dBOperating voltage: 5 V DC (+/- 10 %)Operating current: < 30 mAVSWR: max. 2:1Scope of delivery:GPS antennaPlastic mounting base for screw fastening

The easyTRX3S is the further development of the easyTRX3 AIS Class B transponder with SOTDMA technology and 5 watt transmission power. WiFi and ME SENSE Relay for smart boat monitoring have been added to the transponder.With the standard WiFi module, all AIS data received via the NMEA network can be forwarded to a wirelessly connected end device such as a tablet or smartphone or to a chart plotter. Thanks to its Bluetooth functionality, the easyTRX3S can also serve as the heart of the ME SENSE yacht monitoring system. The data from up to 20 sensors and 10 actuators is transmitted to the relay via Bluetooth. From there, it is transmitted to the ME SENSE app via the marina's Wi-Fi network or your own LTE router. This allows the yacht itself to be monitored conveniently from home.SOTDMA technologyBased on AIS Class B SOTDMA (Self Organized Time Division Multiple Access) technology, the easyTRX3S transmits with higher (5 watts) transmission power and priority. The transmission slots for the next four transmissions are reserved automatically. Even in areas with high traffic volumes, the easyTRX3S is always able to transmit position reports, as SOTDMA has priority over regular AIS Class B devices with CSTDMA (Carrier Sense Time Division Multiple Access). The higher transmission rate improves the visibility of your own AIS position reports on AIS-capable systems.Integrated GPS antenna and active VHF antenna splitterThe integrated GPS antenna increases the independence of mounting the easyTRX3S device on board. On GRP and wooden yachts, only a power connection and a VHF connection are required. On steel yachts, the external GPS antenna available as an accessory improves reception. The integrated, active VHF antenna splitter ensures that the same antenna can be used for VHF radio and AIS. The preamplifier reduces the physical loss to a minimum.FeaturesInternationally certified AIS Class B transponderSOTDMA (time slot method) technology with 5 watts of radiated transmission powerFaster transmission intervals (depending on the speed of the vessel)Complies with the new international standard IEC62287-2CPA alarm & anchor alarmInternal memory for recording travel data (black box)Configuration of the device with USB power supply possibleInternal data memory can be read out with USB power supplyIntegrated WiFiIntegrated antenna splitterIntegrated GPS antennaConnections: NMEA2000, NMEA0183 and USBWater-, weather-, shock- and vibration-resistant, handy housingIoT ME SENSE yacht monitoringAlternatively available with additional LAN or DVB-T/FM radio moduleTechnical data1 channel VHF transmitter2-channel VHF receiver (AIS frequencies: 161.975 MHz and 162.025 MHz)72-channel GNSS/GPS receiverChannel sensitivity: = -112 dBmProtection class: IP67 (dust and waterproof against temporary submersion)Intended for installation below deckOperating temperature: -10°C to + 55°CNMEA output message: VDMTransmission power: 5 WOperating voltage: 9 - 32 voltsDimensions (L/W/H): 190 x 135 x 60 mmWeight: approx. 700 gScope of deliveryeasyTRX3S transpondereasyTRX3S connection cable (approx. 2 m)Connection cable easyTRX3S to VHF radiotelephone (approx. 1 m)USB connection cable (approx. 1.8 m)Quick guide (the detailed user manual can be downloaded from the internal memory)Programming software for Windows PC and Apple Mac on internal memoryWiFi antennasApprovalsApproved by BSHAIS according to IEC 62287-2:2017Environment according to IEC 60945:2002GPS according to IEC 61108-2003 and EN 301843-1:2004Product safety according to EN 60950-1 ITU-R M.1371-5