ACR GLOBALFIX V5 AIS EPIRB with floatfree bracket / RLS, NFC

€1,159.00*

Prices incl. VAT plus shipping costs

Available in 3 days, delivery time 1 Tag

Available in 3 days

description

ACR GLOBALFIX V5 AIS

activation

automatic

Stk

MED / SOLAS approval (see "Downloads & Information" below). The distress beacon (EPIRB) alerts in addition to the message via COSPAS/SARSAT satellites also in close range via AIS. The Return Link Service (RLS) provides a visual confirmation that the distress message has been received and thus a reassuring feeling. Near Field Communication (NFC) allows a (suitable) smartphone to monitor the EPIRB via an app.

Before delivery, the MMSI of your vessel must be programmed into the EPIRB.

To do this, please select the initial programming (Article-No. 3957-000) under "Accessories" further down on this page. In the last step of the order process, you can enter the required ship data under "Remarks": Ship name, MMSI, IMO no., call sign, flag.

Floatable yellow polycarbonate housing. Integrated, fast-launching 72-channel GPS receiver. Alerted rescue aircraft and vessels are directed to the scene of the accident via the VHF homing signal on 121.5 MHz. Bright LED strobe flash (also infrared). Lithium battery with ten-year replacement cycle. Space-saving, retractable antenna. With self-test functions.

Category I, automatic activation: With hydrostatically triggered float-free wall housing. In an emergency, the EPIRB is automatically released by the HydroFix Hydrostatic release unit (HRU). For mounting outdoors.

Dimensions H x W x D: 280 x 109 x 111 mm, antenna length 190 mm. Weight: 810 g. Dimensions float-free wall housind H x W x D: 400 x 157 x 150 mm.

more information

Show article

📖 View article in the TOPLICHT catalogue

Art. No.	description	activation	Price (unit)	Delivery time	Note list	Buy

Downloads

Before delivery, the MMSI of your vessel must be programmed into the EPIRB.

Dimensions H x W x D: 280 x 109 x 111 mm, antenna length 190 mm. Weight: 810 g. Dimensions float-free wall housind H x W x D: 400 x 157 x 150 mm.

Questions about the product?

Accessories

ACR Hydrostatic release unit HRU HydroFix f. GlobalFix EPIRB

MED / SOLAS approval.Hydrostatic release unit HRU HydroFix (ACR 9490.1) for ACR GlobalFix EPIRB.Specifically, the HRU fits the following ACR EPIRBs:GlobalFix V4GlobalFix V5GlobalFix V6The unit consists of the hydrostatic release unit (HRU), the securing bolt (this must be changed each time the release unit is replaced!) and split pins.Before installation, the corresponding marking of the approval period of two years (from installation) must be made on the HRU.Should the vessel sink, a spring-loaded blade in the HRU will cut the securing bolt in a water depth of 1.5 - 4 metres, allowing the EPIRB to float up freely.

€149.00 *

Details

First Coding EPIRB

Initial programming of a new device purchased from us!An EPIRB - and therefore also a PLB (Personal Locator Beacon) - i.e. a COSPAS-SARSAT satellite radio beacon is generally subject to registration in Germany.Both EPIRBs and PLBs are registered on a ship-by-ship basis. This means that the MMSI of your own ship is programmed into the device, which - unlike with a radio - you cannot do yourself. Alternatively, the PLB can also be registered in the UK on a device/person basis.Therefore, please enter the required ship data in the last step of the order under "Remarks":Ship nameMMSIIMO no. (if available)Call signFlagYou can also send us a copy (e-mail attachment) of the first page of your Ship Station Licence (certificate of assignment).You will receive the corresponding coding certificate (including 15-digit HEX ID code, "protected message") with the device, which you submit to the Federal Network Agency, Hamburg field office.The form for the "Application for the allocation of numbers of the mobile maritime and inland waterway radio call sign, MMSI and ATIS for recreational navigation (SHIP STATION LICENCE)" is used for new applications and applications for amendments.You can find it here: www.bundesnetzagentur.deThe details of your EPIRB / PLB will then be stored with the ITU* and the MRCC** Bremen so that appropriate action can be taken in the event of an emergency at sea. For example, a telephone call can be made to a designated person on shore to check whether it may be a genuine emergency.* The International Telecommunication Union (ITU)** Maritime Rescue Coordination Center (MRCC)

€49.00 *

Details

Last seen products

More articles from this category

McMURDO HRU Replacement Kit for EPIRB

MED / SOLAS approval.McMURDO HRU Replacement Kit. The two variants replace the McMURDO Break t-HRU.The kit has been specially developed for replacement in EPIRBs from the manufacturer McMURDO. It consists of the Hammar hydrostatic water pressure release unit (HRU), the standard safety bolt (this must be replaced every time the release unit is replaced!), seals, screws and a safety clip with safety cord.The HRU for E3/G4/E5/G5 (82-962-0001A) fits the following EPIRBs (also from other manufacturers):McMURDO E5, G5, E3, G4, Rescue 406, Precision 406Kannad Marine EPIRB, SportPro, SportPro PlusSAILOR EPIRB I, EPIRB II, 406&GPS, SGE/SE 406-IIThe HRU for E8/G8 (23-145A) fits the following EPIRBs (also from other manufacturers):McMURDO Smartfind E8 AutoMcMURDO Smartfind G8McMURDO Smartfind G8 Auto AISKannad SafePro AIS AutoKannad SafePro AutoSailor 4065 EPIRB GNSS AutoSailor 4065 EPIRB AutoPrior to installation, the appropriate two year approval period mark (from installation) must be made on the HRU.Should the vessel sink, a spring-loaded blade in the HRU will cut the securing bolt at a water depth of 1.5 - 4 metres, allowing the EPIRB to float freely.

From €199.00 *

Details

HAMMAR H20E hydrostatic release unit HRU for EPIRB

MED / SOLAS approval.The HAMMAR H20E hydrostatic release unit (HRU) releases the floatfree EPIRB when the ship sinks.A spring activated knife cuts the release rod at a water depth of 1.5 to 4 meters, allowing the EPIRB to float free.Expiry date: 2 years after installation (must be marked in the field when being installed on board).Comes complete with releasae rod (must always be replaced together with the HRU!), nut and two plastic washers.SOLAS / IMO approved (wheelmark), SOLAS 74/96 Convention, Reg. III/4 LSA Code, MO Res. MSC. 48/(66), IMO Res. MSC. 81(70), approved to EU Directive 96/98 EC.

€98.00 *

Details

JOTRON Hydrostatic release unit HRU for Tron EPIRB

MED / SOLAS approval.Hydrostatic release unit (HRU) specially modified for replacement in EPIRBs made by JOTRON.The unit consists of the HAMMAR H20E hydrostatic release unit (HRU), the securing bolt (this must be replaced each time the release unit is replaced!), seals, screws and a securing clip with cord.In detail, the HRU (Hydrostatic Release Kit FB-60/FB-40/FBH-40/FB-42/FBH-42, 86218) fits the following EPIRBs:Tron 40AIS EPIRBTron 40VDR EPIRBTron 60S EPIRBTron 60GPS EPIRBTron 60AIS EPIRBBefore installation, the HRU must be marked with the appropriate two-year approval mark (from installation).Should the vessel sink, a spring-loaded blade in the HRU will cut the securing bolt at a water depth of 1.5 - 4 metres, allowing the EPIRB to float freely.

€193.90 *

Details

ACR Hydrostatic release unit HRU HydroFix f. GlobalFix EPIRB

€149.00 *

Details

ACR Battery für GlobalFix V4 EPIRB

Lithium replacement battery (ACR1104) for the ACR GlobalFix V4 EPIRB.Attention: The battery does not fit the newer GlobalFix V5 and GlobalFix V6 EPIRBs. For these, the battery must be replaced by a service company.In the GlobalFix V4 EPIRB, the battery can be changed independently. Transporting the battery in a car within Germany is permitted without any restrictions. If the battery is to be transported in an aircraft, please check with the airline in advance.

€189.00 *

Details

GME water pressure release HRU Replacement Kit for EPIRB

GME HRU Replacement Kit.The kit was specially developed for replacement in EPIRBs from the Australian manufacturer GME. It consists of the hydrostatic water pressure release (HRU) from Hammar (H20E), the standard safety bolt (this must be replaced every time the release is replaced!), seals, screws and a safety clip with cord.The replacement kit is suitable for all GME EPIRB models.Before installation, the HRU must be marked with the corresponding approval period of two years (from installation).If the ship sinks, a spring-loaded blade in the HRU cuts through the safety bolt at a water depth of 1.5 - 4 metres, allowing the EPIRB to float freely.

€109.00 *

Details

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm