Skip to main content


Downloads

TRANSOCEAN ISO / ISAF Life Rafts are equipped pursuant to ISO 9650-1 and ISAF,
and are thus intended for use even in extreme conditions. In addition to the basic equipment,
it has isolated double floors, accurate activation to -15°C, entry ramp, extensive emergency and
signaling equipment and more.

PLASTIMO has over 40 years experience in making marine-safety products. All life rafts are made in Europe.
The following equipment features are included on all life rafts:
- Double-hull system with a seawater-resistant, highly elastic polyurethane inner hull and an extremely resistant PVC-1100 Decitex outer hull.
- Patented servo mechanism to simply and safely open the gas supply.
- Stable floating position, even in high winds and waves, through exceptionally large, lead-filled ballast bags.
- Packed in a vacuum so that the life raft is better protected.
- 3-year maintenance can be carried out by partners located worldwide.
- With regular maintenance the PLASTIMO rafts can be used for up to 18 years
- Basic emergency gear comes in every life raft.

Delivery time 1 to 4 weeks, depending on supplier's stock.

Legal information about the product
CLP Regulation
Symbols ghs04
Signalword Attention!
H phrases H280, H403

Accessories

Universal rack for life raft container
Stable universal holder for liferafts in containers.Adjustable in size and therefore suitable for various container sizes from different manufacturers: the length of the container can vary from 640 to 840 mm. The minimum width is 400 mm.The holder is neatly made of stainless steel tubing (AISI 316) with a diameter of 25 mm.The four robust stainless steel clamps supplied can be used either for deck mounting or for suspending the bracket from the railing.The liferaft container is held in the bracket by a stainless steel strap. The tension lock on the strap can be locked (in port) with a padlock (included).The illustration may differ slightly from the article.

€196.00 *
HAMMAR H20R Hydrostatic release unit HRU for liferaft
MED / SOLAS approval (see further down on this page under "Downloads & Information").HAMMAR H20R - Hydrostatic release unit (HRU) for the liferaft. Complete with swap strap for lashing and "weak link" attachment eye for the liferaft release line (HR-0100, Article-No. 3263-010). For "small" liferafts (4 to 12 persons), the HAMMAR H20R water pressure release is alternatively available without MED/SOLAS approval (HR-0200).Approval period: 2 years from installation in each case (the corresponding marking is made on board during installation).The hydrostatic release unit releases the rescue equipment when the vessel sinks. A spring-loaded blade automatically cuts the lashing of the liferaft at a water depth of 1.5 - 4 metres so that it can float freely.

From €84.95 *
Plastic life raft brackets
Simple rack for life rafts made from plastic to be screw mounted on deck. Shipping with 2m long belt straps, width of the belt strap (B1) is 30mm.

€41.50 *

Similar products

Life raft VIKING RescYou OCEAN
VIKING's RescYou OCEAN liferaft is ideal for blue water sailing, suitable for inshore, offshore and fishing. A quality product made in Denmark!Large access openings and oversized zips make it easy to enter the liferaft when evacuating the boat. Elements such as the large ballast bags, automatic interior lighting and an insulated floor offer maximum comfort until help arrives. The natural rubber used does not smell anywhere near as pungent as the materials used by other manufacturers.Features:Complies with ISO 9650-1 and ISAF standards and has been independently testedThe fluorescent yellow cover ensures increased visibility from a distance2 viewing windows provide better ventilation and a view of the horizonLarge entry for easy and safe evacuation from the water, direct access from the boat and for helicopter rescueFabric boarding ramp and step loop to get out of the water and into the islandEasy-to-use zip fasteners for freeboard enlargementFive separate air chambersFloating anchor, lifebuoy, buoyant knifeLife lines inside and outside, righting lineFour fast-filling 60 litre ballast bags provide maximum stability and prevent the life raft from capsizing in heavy seasEquipped with reflective, high-visibility tape in accordance with SOLASAutomatic SOLAS/USCG RKL light and interior lightingInsulated floor for additional thermal insulationWith ISO II equipment kit (rescue <24 hours)The large drift anchor reduces the displacement of the liferaftAvailable in sizes for 4, 6 or 8 people.Available in a water-repellent bag or in a fixed container.Delivery time approx. 1 - 4 weeks, depending on the supplier's stock.A solid deck bracket and fittings for mounting on the railing can be found further down on this page under "Accessories". There you will also find GrabBags to complete the equipment of the raft for an expected rescue time >24 hours.It is recommended that VIKING's RescYou liferafts are serviced every three years. Please also observe the locally applicable guidelines.

From €2,665.00 *

Last seen products

More articles from this category

Universal rack for life raft container
Stable universal holder for liferafts in containers.Adjustable in size and therefore suitable for various container sizes from different manufacturers: the length of the container can vary from 640 to 840 mm. The minimum width is 400 mm.The holder is neatly made of stainless steel tubing (AISI 316) with a diameter of 25 mm.The four robust stainless steel clamps supplied can be used either for deck mounting or for suspending the bracket from the railing.The liferaft container is held in the bracket by a stainless steel strap. The tension lock on the strap can be locked (in port) with a padlock (included).The illustration may differ slightly from the article.

€196.00 *
Plastic life raft brackets
Simple rack for life rafts made from plastic to be screw mounted on deck. Shipping with 2m long belt straps, width of the belt strap (B1) is 30mm.

€41.50 *
HAMMAR H20R Hydrostatic release unit HRU for liferaft
MED / SOLAS approval (see further down on this page under "Downloads & Information").HAMMAR H20R - Hydrostatic release unit (HRU) for the liferaft. Complete with swap strap for lashing and "weak link" attachment eye for the liferaft release line (HR-0100, Article-No. 3263-010). For "small" liferafts (4 to 12 persons), the HAMMAR H20R water pressure release is alternatively available without MED/SOLAS approval (HR-0200).Approval period: 2 years from installation in each case (the corresponding marking is made on board during installation).The hydrostatic release unit releases the rescue equipment when the vessel sinks. A spring-loaded blade automatically cuts the lashing of the liferaft at a water depth of 1.5 - 4 metres so that it can float freely.

From €84.95 *
Senhouse sliphook HAMMAR 20
Stainless steel senhouse sliphook (pelican hook) for lashing lifebouys in touch with HAMMAR H20 hydrostatic release units. Lenght: 150 mm. Maximum working load: 3 kN Weight: 200 g.

€59.50 *