Go to homepage
€0.00*
Jobs
Catalogue
Quick order

DHR Magnetic valve for signal compressed air horn

3421-104 DHR-Magnetventil 24 VDC für Druckluft mit 8mm-SR-Anschluss
3421-114 DHR-Magnetventil 24 VDC für Druckluft mit 10mm-SR-Anschluss

from €124.95*

€124.95*

Prices incl. VAT plus shipping costs

Available, delivery time: 1 - 0 Tage

In stock

description
model
Stk

Magnetic valve 24 VDC for controlling a signal compressed air horn or other compressed air applications.

In conjunction with a control panel or a push button, the magnetic valve controls the compressed air supply from a compressor with tank.

more information
Show 2 articles


Magnetic valve 24 VDC for controlling a signal compressed air horn or other compressed air applications.

In conjunction with a control panel or a push button, the magnetic valve controls the compressed air supply from a compressor with tank.

Questions about the product?

Last seen products

More articles from this category

MARCO TCE Electromagnetic Horn
MARCO TCE Electromagnetic Horn
MARCO TCE electromagnetic horn with reduced dimensions but with high sound output. Runs with an acoustic pressure of 114 dB(A) and a frequency of 350 Hz.  Listen to the sound here.A robust construction of trumpet - made of white enamel brass - and body - made of stainless steel.Little energy consumption. Available in 12 Volt or 24 Volt.Dimensions L x D: 250 x 100 mm.

From €89.90 *
Details
MARCO TC1/P Electromagnetic horn
MARCO TC1/P Electromagnetic horn
MARCO TC1/P small electropneumatic horn (250 x 100 mm) with high sound output. Works with an acoustic pressure of 116 dB(A) and a frequency of 420 Hz.  Listen to the sound here.Body made of white ABS plastic.Comes complete with electric compressor, tubing (120 cm) and mounting kit.Available for 12 Volt or 24 Volt.

From €57.90 *
Details
MARCO HURRICANE Compressor horn
MARCO HURRICANE Compressor horn
MARCO HR1 HURRICANE built-in electropneumatic horn for boats. Complete system with integrated compressor, with immediate sound output when pressing the push button. Suitable for yachts under 12 meters and as secondary system . The compressor is integrated in the housing, no air tubing is required, the installation is very easy. Plastic housing, bracket of stainless steel, visible grid of plastic.Colour of grid: white or chrome colour.Comes complete with relais, but no switch included.For 12 V or 24 V.Typical marine low frequence sound of 300 Hz, acoustic pressure 120 db(A).NMMA approved. Dimensions: Grid: 185 x 125 corpus 130 mm behind bulkward.

From €64.90 *
Details
Electric horn (hailer) DAVEY 2010
Electric horn (hailer) DAVEY 2010
Electric horn of all brass construction, with spun body and trumpet.Brass bracket.Surface polished brass or chrome plated.Volume  114 dB(A), frequenzy 340 Hz,.Available for 12V or 24V.

From €156.50 *
Details
MARCO MT1 Electronmagnetic signal horn
MARCO MT1 Electronmagnetic signal horn
Simple electromagnetic horn made of chrome-plated brass.The electromagnetic sound group is carefully protected, made of anti-corrosive material and the chrome plating is resistant to salt. Complete with mounting bracket.Volume 114 dB(A).Optionally with low tone (bass, MT1-L), frequency 410 Hz, orwith high tone (treble, MT1-H), frequency 490 Hz.Can be used as a single horn.Alternatively, the high-frequency horn and the low-frequency horn can be combined to form a double horn.Available for 12 V or 24 V.  Listen to the bass sound here.

From €43.90 *
Details
MARCO EM2 Signal horn stainless steel
MARCO EM2 Signal horn stainless steel
Unpressurized electric horn with electromagnetic sound generation. Stainless steel horn.Volume 118 dB (A), frequency 370 Hz.  Listen to the sound here.

From €99.90 *
Details
MARCO MA1-S Single air signal horn brass
MARCO MA1-S Single air signal horn brass
Compressed air signal horn with horn of chromed brass.Comes with compressor, relay and assembly materials.Frequency 228 Hz. Volume 108 dB (A).  Listen to the sound here.A spare compressor is also available.

From €98.90 *
Details
MARCO RIM-N Compressor double horn
MARCO RIM-N Compressor double horn
Compressed-air double hornDeep tone 177 / 218 Hz,105 db(A).  Listen to the sound here.Made of chromed brass.Comes with compressor, relay and assembly materials.Available for 12 Volt or 24 Volt systems.

From €272.50 *
Details
MARCO M3 Compressor with stainless steel storage tank
MARCO M3 Compressor with stainless steel storage tank
Compact, lightweight, quiet compressor with 8-litre storage tank.Quiet stand due to four rubber feet, practical carrying handle on the motor. The compressor is equipped with a pressure gauge and condensate drain valve.It is suitable for sound signalling systems and other compressed air applications on board.Available for 12 V or 24 V on-board power supply.Motor power 240 watts.Operating pressure up to 8 bar.Filling capacity approx. 47 l air/minute.Connection: 1/4" screw connection with quick coupling for plastic pipe 8 mm (inner diameter 6 mm). You will find this compressed air pipe further down this page under "Accessories".

From €599.00 *
Details
MARCO PW2 Compressor horn (boats
MARCO PW2 Compressor horn (boats
Horn for use with compressed air.Pleasant deep tone: approx. 315 Hz, volume 123 dB(A) (1 m).For ships up to 20 metres in accordance with the international COLREG 1972 regulations.EU approval for IMO Class IV from RINA, Lloyd's Register, BureauVeritas, MCA, BSH and NMMA.Comes complete with compressor MARCO M1,  air tube (5,0 m long, 8mm) and assembly materials.The distance between horn and compressor should not exceed 5,0 m in order to avoid pressure loss.Brass horn, painted white or chromed.Frequency approx. 315 Hz, 123 dB(A) (1m).  Listen to the sound here.The matching compressor MARCO M1 is available as a spare part.

From €479.00 *
Details
MARCO PW3 Whistle (ships
MARCO PW3 Whistle (ships
MARCO Horn for use with compressed air.Pursuant to COLREG 1972, IMO Class III, approved by RINA, Lloyd's Register, BureauVeritas. For vessels of 20-75 m LoA. Brass horn, painted white.The horn requires an onboard compressed-air supply of 6-12 bar (6 l/sec).The electro-magnetic control valve is included. The system must be ordered to match your 12 Volt or 24 Volt power supply for this valve.The scope of delivery includes furthermore: 10 m 6x8 mm Rilsan air tube and assembly materials.Frequency 315 Hz, 132 dB(A) (1 m).  Listen to the sound here.

From €449.00 *
Details
MARCO M1 Compressor
MARCO M1 Compressor
Compact M1 compressor from the Italian manufacturer MARCO. With its 2 bar pressure, the compressor without oiler is suitable for intermittent operation on sound signalling systems.Available for 12 V or 24 V voltage.Delivery rate (volume flow): 60 l/minMotor power: 180 WThreaded connection: BSP 1/4", 6x8 mm air tubeSplash-proof: in accordance with IP67

From €169.00 *
Details
MARCO EW2 Electronic Horn
MARCO EW2 Electronic Horn
Electronic sound signaling system with pressure chamber loudspeaker. The system has an approval for ships up to 20 m as a signal system and fog horn, according to COLREG 1972, IMO Class III, approved by BSH, RINA, Lloyd's Register, MCA, BureauVeritas.The EW3 sound signaling system consists of the waterproof (IP67) sound horn (loudspeaker) for mounting on the mast, the control box with sound generator (200 x 150 x 80 mm) and the control panel.The sound frequency is 675 Hz, the loudness 122 dB(A) at 1 m. A signal of up to 8 tones can be programmed, with a repeat frequency of 60 or 90 seconds.The integrated ultrasonic preheating of the membrane improves the sound quality under cold conditions.  Listen to the sound here.Available for an on-board voltage of 12 volt or 24 volt.Operation:either via the supplied control panel, which is connected via an RJ45 cable (also supplied) (length 5.0 m),or via a pressure switch (not included).

From €695.00 *
Details
MARCO EW3 Electronic Horn
MARCO EW3 Electronic Horn
Electronic sound signaling system with pressure chamber loudspeaker. The system has an approval for ships from 20 to 75 m as a signal system and fog horn, according to COLREG 1972, IMO Class III, approved by BSH, RINA, Lloyd's Register, MCA, BureauVeritas.The EW3 sound signaling system consists of the waterproof (IP67) sound horn (loudspeaker) for mounting on the mast, the control box with sound generator (200 x 150 x 80 mm) and the control panel.The sound frequency is 690 Hz, the loudness 130 dB(A) at 1 m. A signal of up to 8 tones can be programmed, with a repeat frequency of 60 or 90 seconds.  Listen to the sound here.The integrated ultrasonic preheating of the membrane improves the sound quality under cold conditions.Suitable for an on-board voltage of 24 volts.Operation:either via the supplied control panel, which is connected via an RJ45 cable (also supplied) (length 5.0 m),or via a pressure switch (not included).

€2,399.00 *
Details
MARCO EW2M Electronic Horn Micro/Amplifier
MARCO EW2M Electronic Horn Micro/Amplifier
Electronic sound signaling system with pressure chamber loudspeaker and microphone for audio announcements. The system has an approval for ships up to 20 m as a signal system and fog horn, according to COLREG 1972, IMO Class III, approved by BSH, RINA, Lloyd's Register, MCA, BureauVeritas.The EW2M sound signaling system consists of the waterproof (IP67) sound horn (loudspeaker) for mounting on the mast, the control box with sound generator (200 x 150 x 80 mm), the control panel and a microphone with talk button.The sound frequency is 675 Hz, the loudness 122 dB(A) at 1 m. A signal of up to 8 tones can be programmed, with a repeat frequency of 60 or 90 seconds.The integrated ultrasonic preheating of the membrane improves the sound quality under cold conditions.  Listen to the sound here.Available for an on-board voltage of 12 volt or 24 volt.Operation:either via the supplied control panel, which is connected via an RJ45 cable (also supplied) (length 5.0 m),or via a pressure switch (not included).

From €889.00 *
Details
MARCO EW2 Replacement Loudspeaker
MARCO EW2 Replacement Loudspeaker
Acoustic horn / horn loudspeaker for the electronic horn MARCO EW2 (EW2M)and for the identical horn from AQUA SIGNAL.Output: 60W at 12 V. 8 Ohms.

€549.00 *
Details
MARCO EW3 Replacement Loudspeaker
MARCO EW3 Replacement Loudspeaker
A replacement part of the electronic horn MARCO EW3 is also the acoustic horn (loudspeaker) for mounting in the mast..Fitting also as bull horn loudspeaker for outside montage.

€2,189.00 *
Details
MARCO EW3M Electric Horn Micro/Amplifier
MARCO EW3M Electric Horn Micro/Amplifier
Electronic sound signaling system with pressure chamber loudspeaker and microphone for audio announcements. The system has an approval for ships from 20 to 75 m as a signal system and fog horn, according to COLREG 1972, IMO Class III, approved by BSH, RINA, Lloyd's Register, MCA, BureauVeritas.The EW3 sound signaling system consists of the waterproof (IP67) sound horn (loudspeaker) for mounting on the mast, the control box with sound generator (200 x 150 x 80 mm), the control panel and a microphone with talk button.The sound frequency is 690 Hz, the loudness 130 dB(A) at 1 m. A signal of up to 8 tones can be programmed, with a repeat frequency of 60 or 90 seconds.The integrated ultrasonic preheating of the membrane improves the sound quality under cold conditions.  Listen to the sound here.Suitable for an on-board voltage of 24 volts.Operation:either via the supplied control panel, which is connected via an RJ45 cable (also supplied) (length 5.0 m),or via a pressure switch (not included).

€2,499.00 *
Details
Waterproof loudspeaker IP67
Waterproof loudspeaker IP67
Waterproof loudspeaker to be used in connection with VHF radio, signalling or PA system or intercom. For outside mounting.Impedance 8 Ohm / 20 W.White plastic body, stainless steel (AISI 316) mounting bracket.Waterproof IP67.

€123.90 *
Details
DHR H400 MARITONE Signal compressed air horn
DHR H400 MARITONE Signal compressed air horn
Approved for seagoing vessels up to 75 metres in accordance with COLREG '72, Class III, and for all inland waterway vessels.The H400 Maritone air horn from Den Haan Rotterdam has an audible range of more than one nautical mile.The diaphragm housing is made of 316L stainless steel, the diaphragm of phosphor bronze. The acoustic horn is made of brass and painted white (red inside). These high-quality materials ensure a long service life.A compressor with a pressure of at least 7 bar and an air volume of 8-12 l/s, a 8x10 mm compressed air tube with connector, a magnetic valve and a push button or control panel are required for operation. You will find all this under "Accessories" further down on this page.Specifications:Sound pressure: 130 dB at 1/3 octave or 140 dB(A)Frequency: 440 HzCompressed air required: 7 barAir consumption: 8 to 12 l/sConnection: ¼" with coupling for plastic hose (⌀ 10 mm).Materials: Diaphragm housing made of stainless steel (1.4401) and a brass horn with white (red inside) powder coatingApproval: Sea-going vessels up to 75 metres in length and inland waterway vessels on German inland waterways

€599.00 *
Details